Detailed List of the Equipment (for one unit) 1-1. Wood Drying Controller 1 set
Type: DELPHI HOLZMEISTER Delphi
Place of Production: Italy
Technical Specifications:
Measurement and Control Range of Temperature: 0-100ºC
Measurement and Control Range of Humidity: 0-100%
Measurement Range of Moisture Content of Wood: 4-60%
Power: 30W
Environmental Specifications:
Input Voltage: 220+10%AC
Working Temperature: 5-50ºC
Working Humidity: 35-75%
Auxiliary Parts:
Temperature and humidity transducer and wire 1 set
Measurement probe of moisture content of wood 12 pieces
Measurement plug of moisture content of wood 12 pieces
EMC sets transducer and wire 6 sets
1-2. Control Panel
Type: FW-EC
Air Circulating System
2-1. Fan 5sets
Type: 8#
Place of Production: SUZHOU
Technical Specifications:
Maximum Air Volume: 32000M3/h
Working Air Pressure: 20mmH2O
2-2. Motor 5sets
Type: 100 Series
Technical Specifications:
Rated Voltage: 380±10%AC
Rated Current: 5A
Rated Power: 3.0Kw
Insulation Grade: H
Protection Grade: IP55
Place of Production: SHENYANG
Environmental Specifications:
Maximum Working Temperature: 120ºC
Maximum Working Humidity: 100%
The Way of Working: Continuous
2-3. Fan Rack 1 set
Place of Production: LIYANG
Material: Shaped aluminum alloy
2-4. Ceiling 1 set
Place of Production: LIYANG
Material: 1.0mm corrugated aluminum alloy plate
Heating System
3-1. Bimetallic Heat- Exchanger Coils 4sets
Place of Production: LIYANG
Technical Specifications:
Fin Type: Rolled
Fin Material: Aluminum Alloy
Tube: Stainless steel tube
Heat-Exchanging Area: 320 M2
3-2. Internal Piping 1 set
Place of Production: LIYANG
Material: Seamless steel tube
3-3. Electromagnetic heating three way valve
Type: 65
Place of Production: SIEMENS
Technical Specifications:
Standard: 65
Working Voltage: 220V/AC
Maximum Allowed Working Temperature: 200ºC
Working Pressure: 0.3-10Kg/cm2
3-4. External Piping and Valves 1 set
Place of Production: LIYANG
Material: Seamless steel tube
Spray System
4--1 Spray system 1 set
Pump Germany
Pressure:70b
Spray volume:500L/h
Water tank: 100L,
4-2. Internal Piping 1 set
Place of Production: LIYANG
Material: Stainless steel tube
Spray system cup 8sets
4-3. External Piping and Valves 1 set
Place of Production: LIYANG
Material: Seamless steel tube
Venting System
5-1. Venting Motor 2 set
Type: SIEMENS
Place of Production: Germany
Technical Specifications:
Input Voltage: 220V±10%/AC
Power: 4W
Output Torque: 15NW
Maximum Load Area: 4M2
5-2. Venting Duct 8sets
Place of Production: LIYANG
Material: Aluminum Alloy
Standard: D300
5-3. Driving Mechanism 2 sets
Place of Production: LIYANG
Material: Seamless and stainless steel tube
Door System
6-1. Door 1 leave
Type: FW-80
Place of Production: LIYANG
Standard: 9100×4450mm
Material:
Rim: Shaped aluminum
Frame: Shaped Aluminum
Insulation Material: insulation layers
Sealing Material: custom-tailored special-shaped rubber tube
Auxiliary Parts:
Door Case: Shaped aluminum alloy
6-2. Inspection Door 1 set
Place of Production: LIYANG
Standard: 1600×600mm
Auxiliary Parts:
Door Case: Shaped aluminum alloy
6-3. Door Carrier: 1 set
Type: Sliding and supported with floor rail
Place of Production: LIYANG
Housing
7-1. Post, Beam, Truss
Material: Shaped aluminum or Shaped steel
Place of Production: LIYANG
7-2. Wall
Internal Wall Panel: Aluminum plate
Type: 1.2mm
Place of Production: LIYANG
External Wall Panel: corrugated Aluminum plate
Type:1.0mm
Place of Production: LIYANG
Insulating marterial: Fiber glass
Thickness: 100mm
Density:50K
7-3. Control Room
Material: Polystyrene panel
Our engineers and technicians coordinating with the User's personnel shall complete all installation and shall be responsible for the trial run until all equipment run well.
We shall train the kiln drying operators for Users free of charge on site or in our company. The experts from the Institute of Drying Technology shall give lessons in drying mechanism and operating rules to make the operators have a real grasp of the wood drying technology and be skilled in wood drying.
1. We shall give prompt maintenance service to our Users by email and phone.
2. We shall provide spare parts at the best price.
3. We shall provide free latest wood drying technology for our Users and can provide particular technical service according to User's individual requirements.