Product Specifications
Prod Model: |
XF |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Structure: |
Air Flow Drier |
Operational Method: |
Continuous |
Operation Pressure: |
Atmospheric Dryer |
Heating Mode: |
Convective |
Movement Way: |
Combined |
Product Description
XF Series Fluid Bed Drying Machinery
Fluidizing dryer is also called fluid bed. Through operation and improvement over 30 years, it has play an active part in the fields of pharmaceutical, chemical, foodstuff, gain and so on industries. It consists of air filter, fluid bed, cyclone separator, dust collector, high-speed centrifugal fan, control cabinet and so on. Because of the difference of property from raw material, it is necessary to equip dust remover in accordance with practical needs. It may select cyclone separator and dust collector both or one of them. In general, cyclone separator can be selected if the raw material is larger and the dust collector may be selected if the raw material is light. Moreover, there is pneumatic feeding device for your selection. There are two kinds of operation for this machine, continuous and intermittent type.
The clean and hot air enters into fluid bed through distributor of valve plate. The wet material is fed from the feeder forms the fluid state by hot air. Because of the wide contact between hot air and raw materials, the time of drying is short. If use continuous type, the material enters from the front of bed, fluidized in bed for several minutes, and float another side of bed. The machine' works in negative pressure.
Drying process of medicines, chemical raw material, foodstuff, grain processing, feed and so on. For example, raw medicine, tablet, Chinese medicine, foodstuff of health protection, drinks, feed, resin, citric acid and other powders. The suitable diameter of raw material is normally 0.1-0.6mm. The most applicable diameter of raw material will be 0.5-3mm.
Notes: The drying capacity is measured based on the primary moisture of crystal of plum is 20% and its final moisture is 5% and the temperature of air inlet is 130 degree Celsius. The drying capacity of other raw materials will be based on the practical drying condition. When choose models, please note that: Model A should be matched with cyclone separator and Model B with inside bag dust collector and Model C with cyclone
Type | Drying capacity (Kg/h) | Fan | Air intake Temperature (º C) | Material discharge temperature (º C) | Heating energy consumption |
Power (kw) | Air pressure (Pa) | Air volume (M 3 /h) | Steam (kg/h) | Elec. Power (kw) |
XF-10A | 10-15 | 5.5 | 4900 | 2300 | 60-140 | 40-80 | 50 | 30 |
XF-10B | 4 | 3800 | 2300 |
XF-20A | 20-25 | 7.5 | 5000 | 3100 | 50 | 60 |
XF-20B | 5.5 | 3500 | 3100 |
XF-30A | 30-45 | 15 | 6000 | 4200 | 50 | 90 |
XF-30B | 11 | 4700 | 4200 |
XF-50A | 50-80 | 22 | 7400 | 6000 | 250 | 150 |
XF-50B |
Changjiang Drying Equipment Factoryis a famous one specialized in producing drying equipment and also state and China Chemical Equipment Corporation specially-designated enterprise for producing drying equipment. It covers an area about 30000 square meters and 21000 square meters of building area. It has $1.95 million yuan of fixed assets and holds 120 sets of special processing equipment and powerful technical force. It can produce more 1500 sets of equipment for drying, granulating, mixing and so on. The products have 24 of kinds about 180 specifications and varieties. Its credit class is AAA. It has passed quality assurance system authentication of ISO9001.
Zha Yitong, founder of the enterprise, devotes himself to research, production and management of drying equipment all the time for more than twenty years. "Changjiang dry will be synchronous with science and technology", the enterprise pays much attention to talent and scientific and technological creation. Early or late, it has cooperated with Shanghai Medicine Institute, Wuhan Medicine Institute, Sichuan Medicine Institute, Qinghua University, Shenyang Chemical Institute to develop and with factories that belong to pharmaceutical industry, chemical industry, foodstuff industry and so on to study new technology and develop new technique and provide new products. The factory has prepared different model machine for test too. Welcome customers to investigate or bring sample for test.
The enterprise is well known as its products fine in manufacture. "Tongqiu(r)" drying equipment has become the equipment to be chosen by customers. The products are well sold all over the country and also exported to USA, Japan, Southeast Aisa and so on.
New sincerely and create bright future in the new century.