Product Specifications
| Prod Model: |
Energetic-NT-4 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Length: |
1500mm or Customized |
| Color: |
Blue, Black, Green, Natural |
| Thickness: |
5-40mm |
| Type: |
PA6+Glass Fiber, Oil Filled, PA6+MOS2, PA6+Graphit |
| Od: |
115, 127, 133 153mm or Customized |
| Kind: |
PA6 |
| Material: |
PA6 |
Product Description
Cast nylon roller pipe, plastic conveyor roller pipe
Quick Detail:
Excellent sliding properties MC nylon tube
Accept customize color if with appropriate quantity
OD:115, 127, 133 153mm or customized
SGS RoHS approve
Available type: PA6+Glass fiber, oil filled, PA6+MOS2, PA6+graphit
Description:
Trade names:
Polyamides, PA, MC Nylon tube
Available Shapes:
Sheets, Rods, Tubes, Plates
Color:
Natural Beige, Black, Blue, Others
Thickness:
5-40mm
Length:
1000mm, 1500MM or customized
Key Features:
Excellent bearing properties
High impact strength and toughness
Low power factor requirements
High wear resistance
Very good sliding properties
About MC Nylon Sheet & Rod:
Unmodified cast nylon 6 grade exhibiting characteristics which come very close to those of nylon 66. It combines high strength, stiffness and hardness with good creep and wear resistance, heat ageing properties and machinability.
Advantages:
Nylon Rod and Nylon Sheet are tough, durable, general purpose engineering material with special grades for specialty applications. Typical application conditions would be medium speed and temperature in a rugged, abrasive, impact and high load environment.
Disadvantages:
Poor dimension stability, electrical and mechanical properties, may become affected by absorbing moisture or water, acid proof ability not good, can't dye with acid or touch overmuch acid, weak light fastness, low endurance in pollution
Applications:
High load bearings
Wear pads
Support and Guide wheels
Conveyor and Tension rollers
Wire rope sheaves
Buffer pads
Gears, etc.
Note: Usually, the color and length can be customized, width will according to the available extrusion mould or molding mould. Tolerance for length, width, diameter and thickness may vary when manufacturing. More information, please feel free to contact us online or by email.
|
PA6 Properities Data Sheet |
|
Technical Data |
Method of Verification |
Unit |
PA6 |
|
|
|
Physical Properties |
|
Density |
ISO 1183 |
g/cm3 |
1.25 |
|
Water absorption |
ISO 62 |
% |
3 |
|
|
|
Mechanical Properties |
|
Tensile strength at yield |
ISO 527-2 |
MPa |
90 |
|
Tensile strength at break |
ISO 527-2 |
Mpa |
- |
|
Elongation at break |
ISO 527-2 |
% |
≥50 |
|
Modulus of elasticity after tensile test |
ISO 527-2 |
MPa |
3,000 |
|
Modulus of elasticity after flexural test |
ISO 178 |
MPa |
- |
|
Hardness-Rockwell |
ISO 2039-2 |
|
- |
|
Hardness - Shore D |
DIN 53505 |
|
82 |
|
Charpy impact strength at 23 C |
ISO 179 |
kJ/m2 |
N. B. |
|
Friction coefficient |
DIN 53375 |
|
0.38 |
|
|
|
Thermal Properties |
|
Heat deflection temperature - HDT/A |
ISO 75-2 |
C |
75 |
|
Max. service temperature - Short term |
|
C |
160 |
|
Max. service temperature - Long term |
|
C |
100 |
|
Thermal conductivity at 23 C |
DIN 11359 |
W/(K*m) |
0.23 |
|
Coefficient of linear thermal expansion |
ISO 11359 |
10-4*K-1 |
0.85 |
|
|
|
Electrical Properties |
|
Dielectric constant at 1 MHz |
IEC 60250 |
10 6 Hz |
3.50 |
|
Dielectric loss factor at 1 MHz |
IEC 60250 |
10 6 Hz |
0.031 |
|
Volume resistively |
IEC 60093 |
Ohm (Ω) * cm |
≥10 13 |
|
Surface resisively |
IEC 60093 |
Ohm (Ω) |
>10 12 |
|
Dielectric strength |
IEC 60243-1 |
kV/mm |
50 |
|
|
|
Miscellaneous Data |
|
Flammability |
UL 94 |
Class |
HB |
|
|
|
*NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m |
|
|
|
Statement: |
|
|
|
|
The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Energetic will not provide any legally binding guarantee of certain properties, or any suitability. |
Established in 2011 as a dedicated supplier of Engineering Plastics, Energetic is recognised as a leading supplier in the Chinese market, with a focus on Engineering and Industrial materials. Energetic has developed a reputation for service, quality and the ability to advise our customers on "right material with high cost-performance from China". Based on our own plant of POM extrusion, meanwhile the support of our professional manufacturers, Energetic brings to the worldwide market high quality rods, sheets, tubes and other specialty state-of-the-art plastic materials, which include
- Gerneral Plastic: HDPE sheets, HDPE rods, PP sheets, PP Rods, PVC sheets, PVC rods, ABS sheets, ABS rods, HIPS sheets, HIPS rods
- Engineering Plastic: POM sheets, POM rods, PTFE sheets, PTFE Rods, PA6 sheets, PA6 rods, PC sheets, PC rods, UHMWPE sheets, UHMWPE rods, PVDF sheets, PVDF rods
- High Performance Plastic: PPS sheets, PPS Rods
- Insulation Materials: Phenolic Paper Sheets, 3025 Phenolic Cotton Sheet, 3240/FR4 Epoxy sheets & rods, alternative Durostone Sheet CAS761
Our major warehouse is located in the Shenzhen, a seaside city, with a unequalled geographic advantage and mature logistic convenience, we are able to send these heavy cargos to our global clients by sea. We also support a network of distributors strategically located to service those needs of regional areas throughout all over the world.
With many years of experience in the plastics and engineering field, our able and dedicated staff member are qualified to solve your industry problems, answer your questions and satisfy your material needs.
