Categories
High Voltage and Big Capacity Power Transformer
Features:1) Amount of local discharged: The apparent discharge amount is less than 80pC under 1.5 times of rated voltage;2) Noise: Products of 63MVA and below is lower than 58 dB (AN);3) Power loss: no-load loss is 30% lower than that of IEC standard;4) Reliability: All in-service products have no d
Related Products: Power Transformer manufacturer ,Transformer manufacturer ,Distribution Transformer manufacturer ,
Steel type: angle steel or tubular steelMaterials: Q235, Q345 (A36, A572 Gr.50) or othersHeight: 10-100mVoltage: 10-1,000kVAppearance: hot-dip galvanizedShape (round): face/polygonal faceConnection structure: overlap/flange connectionQuality system: ISO 9001:2008, ISO 14001-2004, OHSAS 18001-2007, G
Related Products: Steel Pipe Combination Tower manufacturer , Galvanized Angle Steel Tower manufacturer , Steel Tower manufacturer ,
Features:1) Amount of local discharged: The apparent discharge amount is less than 80pC under 1.5 times of rated voltage;2) Noise: Products of 63MVA and below is lower than 58 dB (AN);3) Power loss: no-load loss is 30% lower than that of IEC standard;4) Reliability: All in-service products have no d
Related Products: Power Transformer manufacturer , Oil Filled Power Transformer manufacturer , Distribution Transformer manufacturer ,
Power Transmission Lattice Steel Tower
Product DescriptionSteel Type:angle steelMaterial:Q235,Q345 (A36, A572 Gr.50) or othersHeight:10-100mVoltage:0KV-500KVAppearance:Hot Dip GalvanizedShape:Round face/Polygonal faceConnection type:Overlap/Flange connectionQuality system:ISO 9001-2008;ISO 14001-2004 ;OHSAS 18001-2007 ;GB/T19001-2008-ISO
Related Products: Steel Tower manufacturer , Steel Frame manufacturer , Power Transmission Tower manufacturer ,
Electric Power Transmission Line Steel Tower
ISO 9001, ISO 14001, OHSAS18001Largest hot galvanization workshopMaterial: Q235, Q345Hot-dip galvanizationOEM welcomedHigh quality with reasonable priceThe voltage gradefrom 100-1,000kVCan produce various height and structure steel towersMonthly production capacitycan reach12,000 metric tonsStrict p
Related Products: Steel Tower manufacturer , Tower manufacturer , Power Transmission manufacturer ,
10kv-1000kv Power Transmission Line Tower
Our towers are produced in one of our ISO9001:2000 certified facilities which adheres to strict quality control procedures through each stage of the manufacturing process which ensures a quality product that exceeds your expectations.Our stringent in-house quality control begins with inspection of a
Related Products: Monopole Tower manufacturer ,Lattice Steel Tower manufacturer ,Tubular Tower manufacturer ,
Steel type: angle steel or tubular steelMaterials: Q235, Q345 (A36, A572 Gr.50) or othersHeight: 10-100mVoltage: 10-1,000kVAppearance: hot-dip galvanizedShape (round): face/polygonal faceConnection structure: overlap/flange connectionQuality system: ISO 9001:2008, ISO 14001-2004, OHSAS 18001-2007, G
Related Products: Tubular Tower manufacturer , Steel Tower manufacturer , Transition Tower manufacturer ,
Professional Supply Camouflage Plant Communications Tower
Telecommunication towerDetails:Telecommunication tower, communication tower, steel monopole towerMaterial: China standard material (Q235, Q345, Q420, Q460 and more)Treatment: hot-dip galvanizedOthers: telecommunication tower, communication tower, microwave communication tower, steel structureCompany
Related Products: Telecommunication Tower manufacturer , Telecom Tower manufacturer , Communication Tower manufacturer ,
220kv Electric Transmission Power Pole
TypeStraight Pole, Tensile Pole, Turn PoleSuit forElectricity distributionShapeConoid, Multi-pyramidal, Columniform, polygonal or conicalMaterialUsually Q345B/A572, minimum yield strength>=345n/mm2 Q235B/A36, minimum yield strength>=235n/mm2As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, S
Related Products: Telescopic Pole manufacturer , Transmission Tower manufacturer , Steel Pole manufacturer ,
Best Prices Steel Transmission Line Electrical Power Poles
TypeStraight Pole, Tensile Pole, Turn PoleSuit forElectricity distributionShapeConoid, Multi-pyramidal, Columniform, polygonal or conicalMaterialUsually Q345B/A572, minimum yield strength>=345n/mm2 Q235B/A36, minimum yield strength>=235n/mm2As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, S
Related Products: Telescopic Pole manufacturer , Transmission Tower manufacturer , Steel Pole manufacturer ,
Hot DIP Galvanized Steel Transmission Line Electrical Power Poles
TypeStraight Pole, Tensile Pole, Turn PoleSuit forElectricity distributionShapeConoid, Multi-pyramidal, Columniform, polygonal or conicalMaterialUsually Q345B/A572, minimum yield strength>=345n/mm2 Q235B/A36, minimum yield strength>=235n/mm2As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, S
Related Products: Telescopic Pole manufacturer , Transmission Tower manufacturer , Steel Pole manufacturer ,
Steel Electric Power Transmission Tower
Power transmission towers Specicifation:110KV-1000KV power transmission line Lattice towerMaterialUsually Q345B/A572, minimum yield strength>=345n/mm2Q235B/A36, minimum yield strength>=235n/mm2As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, SS400, SS490, to ST52-1. ISO,CE and AWS Certifica
Related Products: Transmission Tower manufacturer ,Angle Steel manufacturer ,Power Towers manufacturer ,
S9 Series Oil-Immersion Power Transformer 35kv
The three-phase S9, S9-M series oil-immersed distributing transformer applies new type insulating structure and makessshort-circuit resistance strong. The iron core is made of high-quality cold-rolled silicon-steel plate. High-voltagewinding group is made up of high-quality oxygen-free copper lines
Related Products: 35kva Transformer manufacturer ,Power Transformer manufacturer ,Oil-Immersion Transformer manufacturer ,
20m 110kv Power Transmission Electrical Steel Pole
TypeStraight Pole, Tensile Pole, Turn PoleSuit forElectricity distributionShapeConoid, Multi-pyramidal, Columniform, polygonal or conicalMaterialUsually Q345B/A572, minimum yield strength>=345n/mm2 Q235B/A36, minimum yield strength>=235n/mm2As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, S
Related Products: Telescopic Pole manufacturer , Transmission Tower manufacturer , Steel Pole manufacturer ,
220kv Galvanized Power Transmission Electrical Steel Tubular Tower Pole
TypeStraight Pole, Tensile Pole, Turn PoleSuit forElectricity distributionShapeConoid, Multi-pyramidal, Columniform, polygonal or conicalMaterialUsually Q345B/A572, minimum yield strength>=345n/mm2 Q235B/A36, minimum yield strength>=235n/mm2As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, S
Related Products: Telescopic Pole manufacturer , Transmission Tower manufacturer , Steel Pole manufacturer ,
Factory Price 500kv Electric Power Transmission Steeltower Pole Tower
TypeStraight Pole, Tensile Pole, Turn PoleSuit forElectricity distributionShapeConoid, Multi-pyramidal, Columniform, polygonal or conicalMaterialUsually Q345B/A572, minimum yield strength>=345n/mm2 Q235B/A36, minimum yield strength>=235n/mm2As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, S
Related Products: Telescopic Pole manufacturer , Transmission Tower manufacturer , Steel Pole manufacturer ,
20m Galvanized Power Transmission Electrical Steel Tubular Tower Pole
TypeStraight Pole, Tensile Pole, Turn PoleSuit forElectricity distributionShapeConoid, Multi-pyramidal, Columniform, polygonal or conicalMaterialUsually Q345B/A572, minimum yield strength>=345n/mm2 Q235B/A36, minimum yield strength>=235n/mm2As well as Hot rolled coil from Q460, ASTM573 GR65, GR50, S
Related Products: Telescopic Pole manufacturer , Transmission Tower manufacturer , Steel Pole manufacturer ,
Customized Three- Leg and Four-Leg Power Transmission Line Tower
Qingdao Wuxiao Group was established in 1993, is a professional manufacturer in mast structure design, manufacture, installation for many years, covers an area of 600 acres, annual production capacity can reach 200,000 tons. At present, the company has the most advanced processing equipment, such as
Related Products: Lattice Steel Tower manufacturer ,Power Transmission Tower manufacturer ,Steel Tower manufacturer ,
22kv Distribution Transformer (Oil immersed)
S9 series oil-immersed power transformer 10KV class:FeaturesThe three-phase oil-immersed distribution transformer applies new type insulating structure. The iron core is made high-quality cold-rolled silicon-steel plate. High-voltage winding group is made up of high-quality oxygen-free copper lines
Related Products: Distribution Transformer manufacturer ,Oil Immersed manufacturer ,Power Transformer manufacturer ,
Steel type: angle steel or tubular steelMaterials: Q235, Q345 (A36, A572 Gr.50) or othersHeight: 10-100mVoltage: 10kV-1,000kVAppearance: hot-dip galvanizedShape (round): face/polygonal faceConnection structure: overlap/flange connectionQuality system: ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007,
Related Products: Monopole Tower manufacturer , Steel Pole manufacturer , Steel Tower manufacturer ,
Home | Manufacturers Directory | Hot Products | China Products | Companies List| Resources Directory | China News | Sitemap | Disclaimer | Contact Us | Site Partners