C2TES2 Marble Tile Adhesive is a Two component, highly deformable, high adhesive, with extended open time which is easy to trowel with no vertical slip and an extremely high yield, for ceramic tiles and stone material.
FEATURES AND BENEFITS
1. Two-part flexible Adhesive designed especially for tiling onto resilient surfaces such as fiber cement sheeting, gyprock plaster and particular timber substrates.
2. Water resistant bond
3. Will absorb vibration and reduce sound transmission
4. Will accommodate movement within the substrate
5. Can be used for interior and exterior applications
6. Adheres well to most waterproofing membranes
7. Low viscosity and, therefore, easy workability
8. Working on vertical surfaces without risk of the tiles slipping
9. Excellent ability to cope with deformation in the substrate and tiles
10. Bonds perfectly to all materials normally used in the building industry
11. Open time and adjustability time are particularly long to make fixing earlier
USES
1. C2TES2 Marble Tile Adhesive can be used on both walls and floors, in interior and exterior applications.
2. C2TES2 Marble Tile Adhesive may be used to fix tiles onto plasterboard, fiber cement sheeting, timber floorboards, structural composition board or marine grade ply, concrete, cement renders/screeds, brickwork, blockwork, old ceramic tiles and particular waterproofing membranes.
3. For treated timbers, hardwood timbers or timbers which exude resins/tannins, initially install a fiber cement sheet tile underlay.
4. C2TES2 Marble Tile Adhesive is recommended for thethin or thick bed fixing of all types of ceramic, mosaic, fully vitrified, porcelain, terracotta, slate, quarry, granite and marble tiles with the exception of light colored or green marble.
5. When using C2TES2 Marble Tile Adhesive with translucent/ absorbent tiles, the color of the adhesive must be considered, so as to avoid discoloration problems.
MIXING
1. C2TES2 Marble Tile Adhesive is a two-part adhesive for on-site mixing.
2. A 25kg/2.5lt unit the mixing ratio is 25kg of C2TES2 Marble Tile Adhesive powder to 2.5lt of C2TES2 Marble Adhesive liquid and 5lt water.
3. Add the powder slowly into the liquid while mechanically stirring to ensure a uniform mix results.
4. Allow the mixture to stand for 10 minutes, and then use the adhesive.
DOSAGE
The dosage differs according to the actual condition of the project.
Notched trowel Coverage per/m²
3 x 3 mm APP. 1.6 kg
6 x 6 mm APP. 2.7 kg
8 x 8 mm APP. 3.5 kg
10 x 10 mm APP. 4.5 kg
Few dosages for the even surface
|
FORM |
|
Powder |
|
POTLIFE |
|
Approx. 120 minutes @ 20° C |
|
OPEN TIME |
|
30 minutes@ 20° C |
|
COVERAGE |
|
5– 6m2/25kg bag @3mm bed |
|
TENSILE ADHESION STRENGTH |
|
≥ 1.7MPa under all test conditions |
|
Adjustability Time |
|
Approximately 45 minutes |
|
EARLY TENSILE ADHESION STRENGTH |
|
≥ 1.5MPa after 6 hours |
|
CLASSIFICATION |
|
BS EN 12004 Type C2TES2 |
Gomix Co., Limited is one of the most well known construction material manufacturers in China. Over past many years, we sell various building material worldwide successfully. GOMIX mainly offer: Tile Adhesive & Grout, Wall Putty & Skim Coat, Textured Coating, Emulsion Paint, Waterproofing Slurry, and Insulation Materials.
GOMIX operates a manufacturing plant with 3 separate sets of production facilities to produce high quality polymer-modified cementitious construction materials. Our plant is equipped with the most up to date machinery and uses the latest European technologies to produce premixed dry mortar systems under the GOMIX brand.
Our company uses raw materials from reliable sources chosen for their reputation for stable and superior quality. Advanced high quality additives are imported from leading international suppliers to ensure consistent performance of all our products. The automated manufacturing plant is computer-controlled to ensure that all important parameters remain tight tolerances during the production process.
GOMIX also operates a stringent in-house quality control system to monitor product quality and ensures that the requirements of relevant standards or specifications are met at all times. Therefore, due to superior performance and consistent quality, our products are widely approved and used by most of the government departments and private developers in the region.
With the plant which is located in Guangzhou which is a logistic hub in South China, thus enabling our products to be distributed and delivered efficiently to any locations in the region with low cost.
GOMIX has a team of chartered engineers and material experts together with extensive laboratory facilities to enable products to be continuously developed through intensive research and a strong understanding of the local application conditions and constraints. Hence, we are able to develop and provide suitable premixed construction materials for wide applications to common structures as well as tailor-made products to suit for customers' special requirements of extraordinary applications in the region for example emulsion paint.
GOMIX has a pool of experienced material specialists, technical staff members and sales engineers to assist customers to select the most appropriate products for their needs. Besides, on-site support on product applications and other technical issues will be provided to ensure customer satisfaction and proper use of the products.
