China manufacturer Anaerobic Screw Locker Adhesive Sealant
Feature
1. One component, easy for application.
2. Middle and high strength, good thixotropic property.
3. Cured in the absence of air between two surfaces.
Typical Applications
1. Prevent threaded fasteners from loosening and leakage.
2. Prevent to prevent thread corrosion
3. Used for under M0-M26 thread locking and sealing and engine bowl plug sealing.
Operation
1. For better results, clean all surfaces(external and internal) with a cleaning solvent 6755 and allow To dry.
2. A sufficient amount of glue applied to the binding site and used a conventional method for Assembly, leaving enough time for curing.
3. Shake the product thoroughly before use.
Attention
1. Do not return product to the original container.
2. The product is not recommended for use in pure oxygen and/or oxygen rich environment.
3. This product is not normally recommended for use on plastic parts.
4. Keep out reach of children.
5. This product is recommended to be applied in the well ventilated placeIn the well ventilated place.
6. If accidental skin or eyes exposure occurs, Wash with rinsing. In case of accident or if you feel Unwell, seek medical advice immediately.
Package
50ml/bottle; 250ml/bottle
Storage
Kept in cool and dry place(8-28° C), the shelf life is 24 months.
Confirming the condition of the products that out of deadline before using.
Uncured
|
Testing Term |
Testing Standard |
Typical Value |
Range |
Appearance(uncured) |
|
Red Liquid |
|
Chemical Type |
|
Methacrylate |
|
Viscosity(mPa.s) |
GB/T2794-1995
Brookfield RVF
3#rotor 2rpm |
|
≥5000 |
GB/T2794-1995
Brookfield RVF
3#rotor 20rpm |
2300 |
1800-2800 |
Density( g/cm3) |
GB/T 13354-1992 |
1.10 |
1.00-1.15 |
Flash Point(°C) |
SH/T0733-2004 |
|
>93 |
Maximum fill gaps |
|
0.13 |
|
Fixed Time(min) |
|
15 |
10-30 |
Fully
Cured |
Fully cured at RTV(h) |
|
24 |
|
Breakaway Torque(N.m) |
(GB/T18747.1-2002) |
22 |
|
Prevail Torque(N.m) |
(GB/T18747.1-2002) |
30 |
|
Operation Temperature |
|
|
-50-150 |
Founded in DEC. 2003, SEPUNA has been engaged in researching, manufacturing and marketing automobile sealant and adhesive for 9 years.
Since the foundation, SEPUNA Chemical has been focusing on adhesive's researching and application. Then in 2005, We acquired PUNADE technology which is from Switzerland.
Within 9 years, SEPUNA mainly develops Silicone, Polyurethane and Epoxy resin adhesives. And in the future, we will enlarge our line to Unsaturated, Natural and Acrylic Resin adhesive.
After 9 years' improvement, by the keep researching and innovation, SEPUNA is already a mature adhesive supplier with the core competitiveness.