A6460, is solvent freeα -cyanoacrylate adhesive. It polymerizes
Highly with moisture in air. It's low albefaction and low odor
Instant curing.
Usage
Designed for bonding plastic, rubber, instrument, electric appliance, cosmetic etc.
Operation
1. Cleaning the surfaces that to be glued and coated, removing the rust, dust, greasy dirt and other
Foreign matter and substance. PUNADE cleaner A6755 is recommended.
2. Apply the product to one surface(or two surfaces), then press the two surfaces instantly.
3. Apply the glue in small quantity for better effect.
3. PUNADE activator A6712 can make the curing faster, dispense it on one surface, after solvent
Volatilizing, apply the adhesive on the other surface. Then press the two surfaces instantly.
4. For hard to bond material, use PUNADE primer A6770. Spray it evenly on one surface and wait
To dry, press instantly after applying glue to the other surface.
Attention
1. Keep out of reach of children.
2. The product contains cyanoacrylate, which may irritate skin and eyes. So it is recommended to
Use the product at a well ventilated place.
3. The product can bond skin and eyes instantly, so please wear goggle and glove before operating.
4. In case of contact with skin, DIP in warm soap water and peel off the glue from skin. Do not use
Knife to peel off.
5. In case of contact with eyes, rinse with clean water immediately and call a medical attention.
Package and Storage
Package 20g bottle
Storage
Stored in refrigerator at 2-8
Shelf life: 12 months
We will provide the professional solution for you.
Properties before curing |
Testing Term |
testing standard |
Unit |
Typical Value |
Range |
Appearance |
By Eye |
--- |
Transparent liquid |
|
Basis Material |
|
|
α- Cyanoacrylate ethyl ester |
|
Viscosity |
GB/T 2794-1995 |
Brookfield HB T-Cspindle 30 rpm, mPa@s |
45 |
30-60 |
Density |
GB/T13354-1992 |
25,g/cm3 |
1.10 |
|
Fixture |
|
S |
|
<30 |
Flash point |
SH/T0733-2004 |
|
|
>81 |
Max.Gap fill |
|
mm |
0.1 |
|
Properties after curing |
Full curing time |
|
h |
24 |
|
Shear Strength |
GB/T 18747.2-2002 |
MPa |
18 |
|
Working Temperature |
|
|
|
-55-83 |
Aging under the conditions below and tested at 22 |
Chemical/Solvent Resistance |
Solvent |
Temperature |
% of Initial Strength |
|
|
100h |
500h |
1000h |
Lubricating Oil |
40 |
75 |
75 |
65 |
Leaded Gasoline |
22 |
100 |
90 |
75 |
Ethanol |
22 |
90 |
90 |
90 |
Isopropanol |
22 |
90 |
90 |
90 |
RH95% |
40 |
15 |
0 |
0 |
RH95%(PC) |
40 |
100 |
100 |
100 |
Founded in DEC. 2003, SEPUNA has been engaged in researching, manufacturing and marketing automobile sealant and adhesive for 9 years.
Since the foundation, SEPUNA Chemical has been focusing on adhesive's researching and application. Then in 2005, We acquired PUNADE technology which is from Switzerland.
Within 9 years, SEPUNA mainly develops Silicone, Polyurethane and Epoxy resin adhesives. And in the future, we will enlarge our line to Unsaturated, Natural and Acrylic Resin adhesive.
After 9 years' improvement, by the keep researching and innovation, SEPUNA is already a mature adhesive supplier with the core competitiveness.