CE UL 160W Underfloor Heating Mats for Indoor Floor Heating

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CE 150w underfloor heating mats for indoor floor heating
1.cost effective
2.CE, UL,SAA
3.easy instalation
4.factory
---------------------------------------------------------------------------------------------------------------------------------------------
CE 150w underfloor heating mats for indoor floor heating:
   Electric underfloor heating combines the highest comfort level with maximum energy efficiency. It's a proven technology that's safe, reliable and energy efficient(saving 30%-40% compared with traditional  electric underfloor heating mat ).
 
 
  1. Twin core heating cable with black cold lead
   2. Size is available from 1 to 12 sqm coverage
   3. Teflon/PVC/FEP insulation for long service life
   4. Tinned copper earth braid
 
 
Each  underfloor heating systems include:
   1. Underfloor heating cable mat stitched on self-adhesive mesh
   2. Digital, fully programmable thermostat with built in timer
   3. Floor sensor
 
Safe:High efficient and convient  electric underfloor heating mat . 
Automatism: CE UL  electric underfloor heating mat can automatically(by thermostat) measure the heating requirement, and timely adjust the temperature.
Economical: The cost of installation and operation is relatively low; our electric underfloor heating mat can efficiently avoid damage and save maintain fees. 
Eco-friendly: Our  electric underfloor heating mat  use the cleanest and most efficient power which are popular between customers.
Warranty: 10 years
 
 
 
Benefits of CE 150w underfloor heating mats for indoor floor heating:
 There are no radiators to spoil the clean lines of a room, and space can be saved by freeing up a wall that would otherwise need to be dedicated to a radiator.
 
Electric underfloor heating mat  is also an extremely efficient way to warm a room, and gives a more pleasant heat than radiators, stoves or traditional solid-fuel fires. Heat is emited in a very gentle way. There are no cold spots and, as most of the heat is concentrated in the lower part of the room, very little heat is wasted.
 
 
    Electric underfloor heating mat   which is attached to open-weave mesh mats. There are, however, newer types where the elements are embedded into a continuous roll. The mats or rolls are spread out on the floor, connected together and are then linked up to the thermostat and mains power supply.
 
 
In general, whilst   electric underfloor heating mat  is cheaper to install, and cause less disruption to existing floor structure, they are cheaper to run than wet systems, which are more cost efficient.
 
 
--------------------------------------------------------------------------------------------------------------------------------------------
CE 150w underfloor heating mats for indoor floor heating Specification:

Type	voltage	Rated power	Resistance                      @20oC+10/-5%	Mat size	Length
	V	W	Ω	m	m
SHHM-160-0.5M2	220	80	605	0.5X1.0	5.55
SHHM-160-1.0M2	220	160	302.5	0.5X2.0	11.1
SHHM-160-1.5M2	220	240	201.7	0.5X3.0	16.65
SHHM-160-2.0M2	220	320	151.3	0.5X4.0	22.2
SHHM-160-2.5M2	220	400	121.0	0.5X5.0	27.75
SHHM-160-3.0M2	220	480	100.8	0.5X6.0	33.3
SHHM-160-3.5M2	220	560	86.4	0.5X7.0	38.85
SHHM-160-4.0M2	220	640	75.6	0.5X8.0	44.4
SHHM-160-4.5M2	220	720	67.2	0.5X9.0	49.95
SHHM-160-5.0M2	220	800	60.5	0.5X10.0	55.5
SHHM-160-6.0M2	220	960	50.4	0.5X12.0	66.6
SHHM-160-7.0M2	220	1120	43.2	0.5X14.0	77.7
SHHM-160-8.0M2	220	1280	37.8	0.5X16.0	88.8
SHHM-160-9.0M2	220	1440	33.6	0.5X18.0	99.9
SHHM-160-10M2	220	1600	30.3	0.5X20.0	111
SHHM-160-12M2	220	1920	25.2	0.5X24.0	133.2

 
Remarks: It can be changed according to customers' requirements.
 ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CE UL 150w underfloor heating mats for indoor floor heating Installation
1) Don't damage heat mat. 
2) Well installation can guarantee the efficiency.
3) After the installation, take a full test and make sure the system works well.
 4) Heat insulation materials should be dry and the joint of cable should be sealed.
5)The junction box should be sealed to prevent water leak.
6) Protective sleeve must not be damaged during installation, and the core wire can not bare.