Microcomputer Type Material Universal Measuring Instruments (Hz-1006)

Equipment summary

Hz-1006 microcomputer-type material testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control, This machine is simple to operate, simple structure, it can be directly placed on the testing table for test, especially suitable for controlling quality in production line This series of machine is mainly applied to test the non-metallic and metallic materials which the load is less than 5KN.

Main functions:

This machine can be test all the material in tensile, compression, bending, shear, peel, tear, two-point extended (need add extensometer) and others for control products quality. Such as textile, rubber, plastics, synthetic leather, tape, adhesive, plastic film, composite materials, electronics, metals and other materials,

1. The surface of appearance using electrostatic spray, simple and generous, multi-functions and economy

2. Digital force displayed by LCD, discernible tension or pressure, LCD display clearly

3. Three kinds of units: N-Kgf-Lbf option or automatically exchange;

4. LCD with backlight can be used in low-light environments

5. Single measurement, it can record the max force of tension and compression in both directions, automatic or manual cleared to zero.

6. The system would shut down if overload or over-trip

7. Structure of single-column is beautiful, sophisticated and economy.

Corresponding standard:

GB/T16491-1996 electronic universal testing machine

Applicable industry

It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; Research laboratories; Inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested

Technical parameters:

A. Maximum Load: 5Kg.

B. Capacity choice: 1Kg, 2Kg, 5Kg option. (the load cell + Hz-2000 from U. S. A. )

C Accuracy of load measurement: ± 0.5%

D. Units: Kg, Lb, N

E. Resolution: 1 / 50000

F Displacement resolution: 0.001mm

G. Power system: AC motor, deceleration device ( from Italy)

H. Control system: Testing speed 50~300 mm/min ( 50, 100, 200, 250, 300or the needs of customer ).

I Data sampling frequency: 200times/sec

J. Displacement: 1200mm.

K. Safety devices: Overload, emergency stop devices, limited devices of displacement, leak current protection device

L. Can store 10 testing results and auto-calculate its average, auto-grab maximum force and the force at break.

M Display: Hz-2000 dark blue LCD display, membrane touch keys, with the following functions.

1. Single test, 10-point statistics manually and automatically calculate its average and break values;
2. Multi-unit automatically exchange such as kgf, Lbf, N;
3. Function of free to take point;
4. With multi-calibration function;
5. Using 24-bit AD acquisition, resolution 1 / 200000
6. Decimal digits 0 to 4 arbitrary choice
7. Starting up using password protection feature, which can effectively prevent the non-operators to use
8. Ratio of Breakpoint from 0 ~ 99%, which the user can set according to different materials to stop the machine
9. Overload protection function can be set, effectively preventing machine from overload

O power supply: AC 220V single-phase.

P power: 400W

Q machine size: About 600X450X1800mm(length * width * height).

R weight 70kg

O riginal configuration

A group of tensile fixture

Extension

Company can design and provide the fixtures according to the needs of customers, but the cost needs to add

Model	HZ-1006 10T Universal Tensile Testing Machine
Maximum load	5ton, 10ton,  option
Accurate grade	1grade /0.5 grade
Effective measuring range	Force from 0.2% to 100% (1 grade) / from 0.4% to 100% (0.5 grade)
Measuring accuracy	the value ±1% / the value ±0.5%
Tester resolution	Max load 1/200000, constant the resolution
Load sensor	Basic configuration sensor max load: one
Effective testing width	400mm(can be widened according to customers requirement )
Effective tensile space	800,1200,1400mm (can be increased the height according to customers requirement)
Testing speed	From 0.001 to 500mm/min
Accruacy of displacement measurement	Tolerance: ±0.5% / tolerance: ±0.2%
Deformation of measured system according to the requirements	Min span :10mm, Max range of deformation 800mm Extended  deformation span: 25mm, 50mm, 100mm, range of deformation 5mm, 10mm, 25mm
Accuracy of measured deformation	Tolerance :±0.5% (according to requirement of customer to choose the larger or small deformation)
Safety	Electronic-limit protection
Testing platform moving  device	Fast /slow ( two speeds to control),can jog
Return Back	Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection	Overload 10%,automatic protection
Fixture	A set of tensile fixture
Machine size	80*55*220cm (lenght*width*height)
Motor	Panasonic AC servo motor and drive
Power supply	220V, 50HZ
Power	0.75KW (depending on different demand of force, using different motor)
Weight	about 500 Kg