Categories
| Supplier: | Hubei Veldlion Machinery Co., Ltd. |
|---|---|
| Price: | US $ 35000-45000/Piece |
| Min Order: | 1/Piece |
| Quantity:: | |
| Trade Terms: | FOB,CIF,DAP |
|
|
| Prod Model: | VL9402GYQ |
|---|---|
| Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Liquefied Petroleum Gas Tanker: | LPG |
| Fuel: | Diesel |
| Certification: | ISO9000 |
| Engine Type: | From Tractor |
| Volume: | 50000L |
| Type: | Patrol Car |
| Payload: | 20t |
| Transmission Type: | Manual |
| Power: | Diesel |
| Load Capacity: | 41-50t |
| Emission Standard: | Euro 3 |
| Tank Volume: | >30000L |
| Drive Wheel: | 8?á4 |
| Seats: | ≤5 |
| Horsepower: | 351-450hp |
| Engine Capacity: | >8L |
| Storage: | LPG |
| Tire Type: | Solid Tire |
| Tire Certification: | ISO |
| Tire Design: | Radial |
| Condition: | New |
| item | parameter | item | parameter | |||||||
Vehicle | chassis model | DLQ9402GYQ | Tanker body | (Mpa)Set meter pressure force (Mpa)Maximum working pressure | 1.77 1.60 | |||||
| (KW) engine | / | ()design temperature | 50 | |||||||
| (Kg)curb weight | 16470 | The main material | barrel | Q345R | ||||||
| (Kg)The biggest filling quality | 23520 | head | Q345R | |||||||
| (Kg)Gross Weight | 39990 | (m3)capacity | 56 | |||||||
| axle loading | (Kg)Front axle | 16460 | Filling interface mass | LPG | ||||||
| (Kg) rear axle | 23530 | (Kg) Tank body mass | 12380 | |||||||
| Design speed limit | (Km/h)Flat road | --- | (mm) rot corrosion allowance | 1.0 | ||||||
| (Km/h)Turn bending | --- | Heat treatment | The overall stress relieving heat treatment | |||||||
| Light maximum lateral Angle | --- | (Mpa) Hydrostatic test pressure | 2.35 | |||||||
| (mm)dimensions | 2450× 14× 12333 | |||||||||
| (Mpa) | 1.77 | |||||||||
Emergency switching-off device | Model | Gas phase | QGJ43F-2.5-8 | safety valve | model | A412F-25-16 | ||||
| Liquid phase | QGJ43F-2.5-7 | type | Built-in full rev. Type | |||||||
| Type | (Mpa)Gas phase | Emergency cut-off valve and over current limiting valve combination | (Mpa)Male says pressure force | 2.5 | ||||||
| Mpa)Liquid phase | ||||||||||
| (mm)Valve seat throat diameter | 53 | |||||||||
| Nominal diameter | Gas phase | DN25 | (Mpa)Open and pressure force | 1.86 | ||||||
| Liquid phase | DN50 | (Mpa)Back seat pressure force | ||||||||
| Operation by the type | Gas phase | (Mpa)Row put pressure force | ≤ 2.12 | |||||||
| Liquid phase | Detonation broken sheet material | / | ||||||||
| closed time | (S)Gas phase | ≤ 10 | Rupture disk unloading relief diameter | / | ||||||
| (S)Liquid phase | Rupture disk unloading relief diameter | / | ||||||||
| ()Gas phase | 70± 5 | handling device | Gas phase joint | model | YKAG-3.3-6 | |||||
| ()Liquid phase | type | Quick connector type | ||||||||
Liquid level gauge | model | UQZ-25P | Liquid joint | model | YKAG-3.3-7 | |||||
| type | UQK | type | Quick connector type | |||||||
| (Mpa)Nominal Pressure | 2.5 | (Mpa)nominal pressure | 3.3 | |||||||
| (mm)Measurement and van circumference | 50~2450 | nominal diameter | Gas phase | DN25 | ||||||
| Fine degree | 2.5 | Liquid phase | DN50 | |||||||
| Conducting electrostatic zone model | JD-2 | |||||||||
| manufacture bases | design criterion | GB150.1~GB150.4-2011\ | ||||||||
| manufacturer' s standard | ||||||||||
| Nondestructive testing standard | JB/T4730-2005 | |||||||||
Manufacturers Directory | Hot Products | China Products | Companies List| Resources Directory | News | Sitemap | Disclaimer | About Us | Contact Us | Cautop|
Copyright 2003-2024 China Manufacturer Directory.