Categories
| Supplier: | Green Leaf Chemical Limited |
|---|---|
| Price: | Negotiable |
| Min Order: | 1 |
| Quantity:: | |
|
|
| Prod Model: | GLC-TR604 |
|---|---|
| Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Use: | Appliance Paint |
| Level: | Primer |
| Substrate: | Steel |
| Appearance: | Liquid |
| Method: | Spray, Brush or Roller |
| GREEN LEAF CHEMICAL LIMITED | ||||||
|
GREEN LEAF Handbook of industrial protective coatings |
Aluminum heat-resistant paint (200-315degrees centigrade) TR604 silver |
|||||
| Application | Aluminum paint for the highest temperature 315 degrees centigradeof the surface of the substrates . | |||||
| Products Introduction | For general use of grease aluminum paint. | |||||
| Product data | Solid volume | 48% | ||||
| Dry film thickness | 25microns wet film thickness equal to 52 microns | |||||
| Theoretical spreading rate | 19.2m2/kg,according to required volume solids and dry film thickness of 25 micron meter. | |||||
| Practical Coverage | Allow appropriate loss | |||||
| Works described in detail | Mixing ratio | Single canned | ||||
| Construction Method | ||||||
| Brush or roller | Recommended | |||||
| Airless spray | Recommended use: nozzle width 0.33-0.41 mm (13-16thou) hydraulic pressure of vent 17.6-21.1MPa (176-211 kg / cm) | |||||
| Conventional spray | Recommended | |||||
| Thinner | Generally do not need, for use BW102 | |||||
| Paint equipment cleaning agent | BW102 | |||||
| Use of | No limit | |||||
| Shelf | ||||||
| Drying time | ||||||
| Substrate temperature | Surface dry (min) | Completely dry (h) | Repeat brushing interval | |||
| The shortest | The longest | |||||
|
5degrees centigrade 23degrees centigrade 35degrees centigrade |
18h 8h 6h |
72 24 24 |
16h 10h 6h |
No limit | ||
| Storage and management | Storage | Cool and dry place | ||||
| Packing | 20KGin 20L containers | |||||
| Flashpoint | Greater than 33degrees centigrade | |||||
| Proportion | 1.00kg/ liter | |||||
| Technical requirements and surface treatment | Usually used for the primer surface which have been coated appropriately, the primer surface must be dry and clean, no dirt, or water with a stiff brush to remove surface dirt, then wash away the soluble salt with water. | |||||
| Restrictions | Each not exceeding 25 microns thick, such as for high-temperature substrate, the only allowed one (15 μm thick), or easy to produce bubbles, maintain room temperature when the primer coat for twice . | |||||
| Safety measures | See "Summary of Paint" | |||||
Manufacturers Directory | Hot Products | China Products | Companies List| Resources Directory | News | Sitemap | Disclaimer | About Us | Contact Us | Cautop|
Copyright 2003-2024 China Manufacturer Directory.