One component anaerobic thread locker adhesive sealant/Anaerobic adhesive sealant
Features
1. One component, requires no mixing
2. Service to strong chemicals.
3. Anaerobic sealant, not used in pure oxygen and/or oxygen rich systems
Professions involved
1. Sealing of metal pipes up to M80(NPT)
2. Providing maximum solvent resistance on threaded fittings.
3. Sealing of pipe thread on refrigeration systems, plug and tubular radiator.
Operation
1. For better results, clean all surfaces(external and internal) with a cleaning solvent and allow to
Dry.
2. Apply a 360 bead of product to the leading threads of the male fitting, leaving the first thread
Free. Force the material into the threads to thouroughly fills the voids. For bigger threads and
Voids, adjust product amount accordingly and apply a 360 bead of product on the female threads
Also.
3. Properly tightened fitting will seal instantly to moderate pressures. For maximum pressure
Resistance and solvent resistance allow the product to cure a minimum of 24 hours.
4. Shake up after long-term deposit.
Attention
1. The product is not recommended for use in pure oxygen and/or oxygen rich systems and should
Not be selected as a sealant for chlorine or other strong oxidizing materials.
2. This product is not normally recommended for use on plastics (particularly thermoplastic
Materials where stress cracking of the plastic could result). Users are recommended to confirm
Compatibility of the product with such substrates.
3. Do not return product to the original container.
4...Avoid high temperature in transportation and storage.
5. Stored outside the Children's reaching.
6. This product is recommended to be applied in the well ventilated place.
7. Please refer to the MSDS of this product for detailed information.
Package
250ml/bottle
Storage and transport
1. Kept in cool and dry place(8-28° C), the shelf life is 24 months.
2. Not restricted. Looking out the leakage in the process of transportation.
3. Confirming the condition of the products that out of deadline before using.
Uncured
|
Testing Term |
Testing Standard |
Typical Value |
Range |
Appearance(uncured) |
|
Red Liquid |
|
Chemical Type |
|
Methacrylate Ester |
|
Viscosity(mPa.s) |
GB/T2794-1995
Brookfield RVF
3#rotor 20rpm |
2500 |
1500-3500 |
Density( g/cm3) |
GB/T 13354-1992 |
1.05 |
1.00-1.10 |
Flash Point(°C) |
SH/T0733-2004 |
|
>93 |
Maximum thread diameter |
|
M80 |
|
Fixed Time(min) |
|
20 |
10-30 |
Fully
Cured |
Fully cured at RTV(h) |
|
24 |
|
Maximum sealing pressure(MPa) |
|
71.0 |
|
Strength for remove |
|
Medium |
|
Sealing pressure of work time |
|
Medium |
|
Operation Temperature |
|
|
-50-150 |
Founded in DEC. 2003, SEPUNA has been engaged in researching, manufacturing and marketing automobile sealant and adhesive for 9 years.
Since the foundation, SEPUNA Chemical has been focusing on adhesive's researching and application. Then in 2005, We acquired PUNADE technology which is from Switzerland.
Within 9 years, SEPUNA mainly develops Silicone, Polyurethane and Epoxy resin adhesives. And in the future, we will enlarge our line to Unsaturated, Natural and Acrylic Resin adhesive.
After 9 years' improvement, by the keep researching and innovation, SEPUNA is already a mature adhesive supplier with the core competitiveness.