Product Specifications
| Prod Model: |
RGKL-400 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Name: |
Feed Pellet Machine |
| Power: |
55~160kw |
| Weight: |
1.2~4.5t |
| Capacity: |
0.5~20t/H |
| Certification: |
CE & ISO9001:2008 |
| Color: |
as Your Required |
| Installation: |
Provide |
| Voltgage: |
220~380V, It Can Be Changed by Engineers |
| Size Of Feed: |
1.5~16mm |
| Steam Consumption: |
0.2~0.4t/H |
| Processing Object: |
Cereals |
| Type: |
Pellet Mill |
| Processing Technics: |
Pellet Making Process |
Product Description
Main drive adopts high accurate gear drive, with an output of about 20% higher than belt drive, and the die adopts the quick removing clamps.
The drive part of the machineincluding motoroptimize the high quality bearings made in Switzerland and Japan, which ensure high efficient and steady driving with low noice.
Full stainless steel strengthening feed conditioner, adopts the frequency-conversion speed regulating control to guarantee quality pellet feed.
The alloy steel die is made by international advanced German gun drill and American vacuum furnace, has long service life and ensure smopthly pelleting and high quality.
The international advanced compensation type flexible coupling is of novel and compact structure, safety, low noise and less trouble.
Permanent magnet device of high performance.
Adopt international advaned pipeline system and inlet pressure regulator.
If it is used together witk N8 counter flow cooler, 150× 2d rotary sifter and advanced fineteeth crumbler, the pellet feed can reach the highest quality.
Pellet mill with two or three conditioners can be custom-made to produce high quality poultry, livestock and aquatic feed.
(1). Crushing Process---feed pellet machine
When the thickness of the raw material is >10 mm, and >50 * 50 mm (L * W), the raw materials must first be used for size reduction before the feedstock is sent to the hammer mill (crusher) to reach a diameter of less than 3 mm.
(2). Mixing Process---feed pellet machine
A. The feed mixer equality of mixing is below 7 percent.
B. The rim for sending materials is quite big. There is quite few material left in the machine.
C. This feed mixercomprehensively applies in matching feed factory, chemical industry, food, flour and other sectors Mixed in gravity-free state, no segregation, variety of liquids can be added. Conveyed by three chains, run in low speed, stable operation movement. Short mixing period(40-120 sec/batch), high evenness degree (CV5%) may be up to 2%
D. Two open doors structure, discharge rapidly, no leakage, no residue. Multiform liquid adding system and can be matched with compressed air jetting system Suitable for mixing premix, poultry feed, aquatic feed, additives and chemical and medicine industries, etc
(3). Pelletizing Process---feed pellet machine
RGKL Feed Mill essence of the complete line, has the following features:
1. The lubrication system for feed pellet machine adopts a tracing and inspection system controlled by a microcomputer. When the temperature of the bearings exceeds normal temperatures, the microcomputer will start the auto-lubrication system for lubrication— Thereby conveniently ensuring smooth functioning of the rollers. The lubrication system is comprised of a tracing and inspection system controlled by a microcomputer. There is also the option to lubricate by hand.
2. The drive gear is a precision-made transmission mechanism. The bearings are sourced from SKF in Sweden. The ring die uses a hoop fastening method which increases the speed of discharge in comparison with the previous bolt-fastening method. As a result, the capacity is 10-15% higher than the belt transmission structure.
3. The ring die and roller of the Feed pellet machine has been finely machined using alloyed steel. The heat treatment process is different from other domestic manufacturers in that the carburization treatment increases the depth of hard-facing to 2 mm which improves the anti-abrasion properties of the ring die and roller by a factor of ten. This greatly saves on replacement costs.
MODEL |
RGKL350 |
RGKL420 |
RGKL508 |
RGKL610 |
CAPACITY(T/H) |
Feed |
3-5 |
5-12 |
8-15 |
13-20 |
Biomass |
0.5-0.8 |
1.0-1.5 |
1.2-2.0 |
3-3.5 |
Main power(KW) |
55 |
90 |
110 |
160 |
PELLET SIZE(MM) |
Φ1.2-18 |
Φ1.2-18 |
Φ1.2-18 |
Φ1.2-18 |
POWER OF FEEDER(KW) |
0.75 |
1.5 |
2.2 |
2.2 |
Henan Ruiguang Mechanical Science & Technology Co., Ltd. is a professional manufacturer engaged in the research and development, production, sale and service of machinery. We are located in zhengzhou City, Henan Province and have convenient transportation access.
Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company has introduced a series of advanced equipment.
In addition, we have attained ISO9001 and CE certification. Selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as Russia, Mongolia, India, North Korea and other countries and regions.
Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.
Just contact us, wish we can be your best help.
