Categories
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
---|---|
Use: | Appliance Paint |
Level: | Finish Coat |
Substrate: | Steel |
Appearance: | Liquid |
Method: | Spray, Brush or Roller |
GREEN LEAFE CHEMICAL LIMITED | ||||||
GREEN LEAF Handbook of industrial protective coatings |
Chlorinated rubber mastic paint CR115 |
|||||
Application | For ships, containers, all kinds of steel structures and concrete outdoor facilities such as anti-corrosion, mechanical performance, and has good weather resistance, sealing, and moisture resistance, tough film. | |||||
Products Introduction | A variety of colors, made from chlorinated rubber polymer synthetic resin, plasticizers, pigments, fillers, additives, solvents and other preparation. | |||||
Product data | Solid volume | 44% | ||||
Dry film thickness | 80microns is equivalent to 180microns wet film thickness | |||||
Theoretical spreading rate | 3.63~4.12m2/kg | |||||
Practical Coverage | Allow appropriate loss | |||||
Works described in detail | Mixing ratio | Single canned | ||||
Construction method | ||||||
Airless spray | Recommended | |||||
Brush or roller | Recommended | |||||
Conventional spray | Recommended | |||||
Thinner | BW101 Maximum dilution volume: <5% | |||||
Paint equipment cleaning agent | BW101 | |||||
Use of | No limit | |||||
Shelf life | One year | |||||
Drying time | ||||||
Substrate temperature | Surface dry(h) | Completely dry(h) | Repeat painting interval | |||
The shortest | The longest | |||||
25degrees centigrade |
2~4 |
12~24 |
0degrees centigrade24h 20degrees centigrade8h 30degrees centigrade6h |
No limit | ||
Storage and management | Storage | Store in a cool dry place | ||||
Packing | 25 kgin 20 liter container | |||||
Flash point | 38degrees centigrade | |||||
Proportion | About 1.1~1.25 kg / liter | |||||
Technical requirements and surface treatment | When construction, steel surface should shot blasting or sand blasting to meet the Swedish standards Sa2.5 level, the shop primed steel surfaces should derust again to reach the Swedish standard manual derust St3 level. | |||||
Restriction | Front-supporting coating: epoxy micaceous iron antirust paint, chlorinated rubber aluminum antirust paint, chlorinated rubber aluminum Mastic antirust paint, chlorinated rubber iron red mastic antirust paint, chlorinated rubber cloud iron antirust paint, epoxy glass flake anticorrosive paint. | |||||
Safety measures | See“Summary of Paint" |