Shenzhen Asenware Test and Control Technology Co., Ltd. >> Conventional Fire Alarm

Conventional Fire Alarm

Name: Conventional Fire Alarm
Brand: China-Manufacturer-Directory.com
SKU: 743928525
Availability: InStock
Rating: 5 (80 reviews)

Supplier:	Shenzhen Asenware Test and Control Technology Co., Ltd.
Price:	US $ 125/Piece
Min Order:	1/Piece
Quantity::
Trade Terms:	FOB,CFR,CIF

Product Specifications

Prod Model:	AW-CFP2166
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Zones:	1-32
Power Supply:	110VAC/240VAC
Battery:	12V2ah*2
Fire Relay Output:	Nc and No
Fault Relay Output:	Nc and No
Sounder Output:	2 Circuits
Alarm Volume (',within 1m):	≥110dB
Transmission Mode:	Cable
Certification:	RoHS
Type:	Smoke Alarm
Application:	Fire Project
Signal Transmission:	Wired Alarm
Working Mode:	Passive
Sensor Type:	Electric Alarm
Working Principle:	Electro-Optical Type
Usage:	Smoke
Receive Frequency:	50MHz

Product Description

Conventional Fire Alarm
Introductions:
1. AW-CFP2166-8 conventional fire alarm panel is designed based on EN54 part 2 & 4 standard.
2. Adopted modularized design, flexible extendable capacity.
3. Two-level control mode by a lock
4.27VDC power supply output.
5. FIRE PROTECTION, FIRE ROUTING and FAULT signal output, the output can be configured to dry relay type or wet sources type.
6.2 channel general sounders output.
7. Each zone has 1 circuit detectors input.
8. Each zone can be disable by a button.
9. It has RESET button to reset the panel.
10. SILENCE button to stop BUZZER and SOUNDERS.
11. EVACUATE button to start a manual fire alarm immediately.
12. TEST button to test all LEDs orderly.
13. Low-battery protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
14. Optional GSM module is available for fire alarm by SMS.
Freeman Zhou
GSM: 008613922805315

Asenware, professional fire alarm solution provider.

ITEM	1Zone panel	2Zone panel	4-8 Zone panel	12-32 Zone panel
Model No.	AW-CFP2166-01	AW-CFP2166-02	AW-CFP2166-04-8	AW-CFP2166-12-32
Power specification
Mains supply voltage	110VAC or 240VAC
Internal power supply	27.2VDC
Total output current limited	500mA @ 240VAC	500mA @ 240VAC	3A @ 240VAC	3A @ 240VAC
Main supply monitor for fault	Yes
Battery protection for low voltage	Yes
Batteries (default configuration)	12V2AH*2
Detector circuit specification
Number of circuit	1	2	4-16	4-32
Line fault monitor for open circuit	Yes
Line fault monitor for short circuit	Yes
Line fault monitor for detector removal	Yes, if End of Line Monitor Unit fitted in place of End of Line Resistor
End of Line device	6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Detector continuity diodes	Silicon 1N4001 or Schottky type (required if End of Line Monitor Unit fitted to give Detector Removal Fault)
Call point resistor value	470 to 680 Ω, 0.225 or 0.5 watt
Maximum number of smoke/heat detectors per zone	20 (based on a total detector current of 2mA, each detector consuming 100μA).Note: if End of Line Monitor Unit is fitted, for correct operation maxmum voltage drop must not exceed 12 volts.
Maximum number of manual call points per zone	No limit
Sounder circuit specification
Number of general circuits	2
End of line resistor value	6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Line fault monitor for open circuit	Yes
Line fault monitor for short circuit	Yes
Outputs fused AT	400mA
Maximum number of bells @ 20mA of each sounder output	20
Fuses
Battery fuse	1.5A F 20mm
Sounder outputs	500mA F 20mm
Fire and fault output
Output type	NC and NO relay
Maximum current	100mA
Connection block
Largest acceptable conductor size	2.5mm2
Smallest acceptable conductor size	0.75mm2
Size and weight
Dimensions(mm)	27220070mm	32023190mm	395X502X124	362X565X124
Weight (without batteries)	4kg	5kg	7kg	8kg
Weight (with batteries)	5.8kg	6.8kg	9.6kg	12.5kg

Asenware sets up in 2006, the predecessor is Shenzhen Widesense Technology Co., Ltd. Now Asenware is an international group company.

We are a technology-oriented company that devotes to NDT (Non Destructive Test) and BMS (Building Management System) industries.

We have two factories: One factory is in Shenzhen city for BMS products, and another is in Dandong city for NDT X-ray products.

In our BMS factory, we produce addressable and conventional fire alarm system, CCTV camera and DDC controller.

In our NDT X-ray factory, we produce portable and mobile NDT X-ray flaw detectors, X-ray analysis equipment and the dark room accessories.

We have an experienced R&D team to design special electrical product for test and control usage.

We have been striving to provide customers with satisfying service before, during and after sales.