HGS-10C Thermal Conductivity Hydrogen Analyzer
HGS-10C thermal conductivity hydrogen analyzer belongs to the thermal conductivity gas analyzer. It is
designed by the principle of thermal conductivity, according to the thermal conductivity of the gas and determines its composition. That is to say, use the
relative thermal conductivity of the gas to measure the content of hydrogen in the mixed gases. HGS-10C thermal conductivity hydrogen analyzer with strong anti-interference ability, less influence by environmental temperature and high reliability, is suitable for the conditions of process industry and environmental protection, online use in the scientific research.
Features:
-The instrument is standard 19" cabinet, and it can be easily installed in the entire set of equipment;
-Atmospheric pressure compensation improves the accuracy and stability of the continuous analysis;
-The instrument can realize the middle range measurement and high precision temperature control;
-MEMS infrared light source is electric modulation pulse light source;
-Standard output: 4~20 mA current loop; 8 way switch (relay) output; RS232 digital communication function, which is easy to expand into RS485;
-Touch screen is easy and convenient to operate;
-Colorful LCD screen makes the information clear, eye-catching;
-The instrument can analyze three kinds of gas concentration at the same time, two lines of infrared measurement and the other uses electrochemistry to analyze the oxygen concentration.
Technical parameters:
Measuring range | (0~100)% (it can be chose different range between the specified range.) |
Minimum range | 0~1% |
Zero drift | 1%FS/7d |
Linearity error | +-1%FS |
Response time | Less 25s |
Power supply | 220VAC 50HZ |
Environment temperature | 5-45C |
Ambient air | No strong corrosive gas |
Standard range | 0~10%;(35~75)%;(40~80)%; (75~100)%;(95~100)% |
Span drift | 1%FS/7d |
Repeatability | 0.5% |
Environment humidity | Less 80%RH |
Weight | 8KG |
Ambient wind velocity | Less 0.5m/s, make sure the air around instrument circulate |
Power supply requirements | To avoid inductance characteristics of high power equipment (such as high power motor, high frequency furnace, etc.) share the same phase power supply . |