High Strength Metal Bonding Cyanoacrylate Adhesive (SA1496)
Features
SA1496 is solvent freeα -cyanoacrylate adhesive. It is general purpose, medium viscosity and instantly curing.
Usage
It polymerizes highly with moisture in air with high strength. Designed for bonding metal etc.
Operation
1. Cleaning the surfaces that to be glued and coated, removing the rust, dust, greasy dirt and other
Foreign matter and substance. PUNADE cleaner SA6755 is recommended.
2. Apply the product to one surface(or two surfaces), then press the two surfaces instantly.
3. Apply the glue in small quantity for better effect.
3. PUNADE activator SA6712 can make the curing faster, dispense it on one surface, after solvent
Volatilizing, apply the adhesive on the other surface. Then press the two surfaces instantly.
4. For hard to bond material, use PUNADE primer SA6770. Spray it evenly on one surface and wait
To dry, press instantly after applying glue to the other surface.
Package
20g /bottle
Storage
Stored in refrigerator at 2-8º C Shelf life: 12 months
Properties before curing |
Testing Term |
testing standard |
Unit |
Typical Value |
Range |
Appearance |
By Eye |
--- |
Transparent liquid |
|
Basis Material |
|
|
α- Cyanoacrylate ethyl ester |
|
Viscosity |
GB/T 2794-1995 |
Brookfield HB T-C spindle 30 rpm, mPa@s |
120 |
100-150 |
Density |
GB/T13354-1992 |
25ºC,g/cm 3 |
1.1 |
|
Fixture |
|
S |
|
<30 |
Flash point |
SH/T0733-2004 |
ºC |
|
>93 |
Max.Gap fill |
|
mm |
0.1 |
|
Properties after curing |
Full curing time |
|
h |
24 |
|
Shear Strength |
GB/T 18747.2-2002 |
MPa |
25 |
|
Working Temperature |
|
ºC |
|
-55-120 |
Aging under the conditions below and tested at 22ºC |
Chemical/Solvent Resistance |
Solvent |
Temperature |
% of Initial Strength |
|
ºC |
100h |
500h |
1000h |
Lubricating Oil |
40 |
95 |
95 |
95 |
Leaded Gasoline |
22 |
95 |
95 |
95 |
Ethanol |
22 |
100 |
100 |
100 |
Isopropanol |
22 |
95 |
95 |
95 |
Trichloroethane |
22 |
100 |
100 |
100 |
RH95% |
40 |
70 |
50 |
40 |
|
RH95%(PC) |
40 |
100 |
100 |
100 |
Founded in DEC. 2003, SEPUNA has been engaged in researching, manufacturing and marketing automobile sealant and adhesive for 9 years.
Since the foundation, SEPUNA Chemical has been focusing on adhesive's researching and application. Then in 2005, We acquired PUNADE technology which is from Switzerland.
Within 9 years, SEPUNA mainly develops Silicone, Polyurethane and Epoxy resin adhesives. And in the future, we will enlarge our line to Unsaturated, Natural and Acrylic Resin adhesive.
After 9 years' improvement, by the keep researching and innovation, SEPUNA is already a mature adhesive supplier with the core competitiveness.