Liquid and Powder Waterproof

Product Specifications

Type:	Roofing and Waterproofing
Thickness:	1.2mm
Certification:	MSDS
Material:	Mortar

Product Description

Introduction:
"TUODA" K11 waterproof coating is a kind of two-component waterproof mortar consisted of polymer emulsion and cementitious inorganic powder, which is a recognized water-proof materials in water-proofing industry and the Key recommended products of Construction Ministry and National Building.
 
Application
Widely used in slope base, lavatory bath rooms, swimming pool etc.Components: grey powder, milky emulsion ,as the thrid picture showed.
Just mixed the powder and emulsion evenly when used.
 
Features:
1. Available construction on wet base.
2. Excellent water resistance and weatherability after film formation.
3. It can directly paste tiles or mosaic on waterproof layer because of combination features of waterproof and adhesion.
4.Without any organic solvent, non-toxic, non-pollution, green products.
 
 
Technology index:
 

NO.	Items			Index
				I	II	III
1	Solids contents(%)			≥70	≥70	≥70
2	Tensile strength retention rate/%	Untreated(Mpa)		≥1.2	≥1.8	≥1.8
		Heat treatment		≥80	≥80	≥80
		Alkal  treatment		≥60	≥70	≥70
		Soaking treatment		≥60	≥70	≥70
		UV treatment		≥80	-	-
3	Elongation at break/%	Untreated(Mpa)		≥200	≥80	≥30
		Heat treatment		≥150	≥65	≥20
		Alkal  treatment		≥150	≥65	≥20
		Soaking treatment		≥150	≥65	≥20
		UV treatment		≥150	-	-
4	Low temperature flexibility(10mm, -10ºC)			No cracking	-	-
5	Bonding strength/Mpa		Untreated	≥0.5	≥0.7	≥1.0
			Wet base	≥0.5	≥0.7	≥1.0
			Alkal  treatment	≥0.5	≥0.7	≥1.0
			Soaking treatment	≥0.5	≥0.7	≥1.0
6	Waterproofness (0.3Mpa, 30min)			No water seepage	No water seepage	No water seepage
7	Impermeability/Mpa (mortar back side)			-	0.6	0.8

 
 
Dosage:
1. Each time coating dosage should not be more than 0.8 kg/m2, usually 1.5-2.0 kg/m2.
2. Actual amount depends on construction site environment and surface roughness of used parts.
 
Application pictures: