There is always one type adhesive for thread that you may need below.
222 Threadlocking adhesive
Low strength,thixotropic viscosity.,
Suitable for most metal surfaces,Parts can be disassemble with hand tools.
Ideals for fasteners diameters of M6 and smaller,controlled lubricity can attain accurate clamp loads.
242 Threadlockong adhesive
Medium strength
General purpose,thixotropic viscosity.For locking and sealing M6-M20 threads.
Parts can be separated using hand tools,controlled lubricity,can attain accurate clamp loads.
243 Threadlocking adhesive
Oil resistant,medium strength
Fast curing,used on inert surface,improved oil tolerant,easy to disassemble,can be applied on surfaces with oil
For fasteners smaller than M20
262 Threadlocking adhesive
Medium to high strength
Thixotropic viscosity,excellent chemicals resistance.
Suitable for most metal surfaces, for fasteners smaller than M20.
A permanent threadlocker,Excellent for preventing rust and corrosion in extreme chemical/environmental conditions.
271 Threadlocking adhesive
High strength,low viscosity.
For permanent locking and sealing,fasteners smaller than M36
Heating and tools required for disassemble.
272 Threadlocking adhesive
High temperature,high strength
Withstands temperatures up to 230 °C
For locking and sealing the thread of cylinder
Provides a fast cure on most surfaces,including the part without being cleaned .
Recommended for bolts up to M36.Heating and hand tools required for disassemble
277 Threadlocking adhesive
High strength
High viscosity,excellent chemicals resistance.
For permanent locking and sealing bolts up to M36
Prevent rust and corrosion of threaded fasteners.Heating and hand tools required for disassemble.
290 Threadlocking adhesive
Wicking grade
Medium strength,low viscosity,fast curing.
For locking and sealing pre-assembled bolts M2-M12.Also for sealing welds and porous metal parts.
Prevent rust and corrosion.Heating and tools required for disassemble.
The adhesive is high purity, non solvent-based,and completely safe.
We can adjust the raw materials or synthesis method to achieve the viscosity you desire: anywhere from 2-1,000mPa·s (25°C).
10ml 50ml 250 ml Anaerobic sealant adhesive ,Threadlocker / Henkel / Loctit 243 242 222 260 262 270 290 2400
Using Method
1) Remove the oil and grease from the surfaces to keep it dry and clean
2) the threads should be coated enough glue until filling the whole gap. the best coating ways is coating the threads with a thin film with 0.05mm
3) Tighten the thread and wipe off the excess adhesive
4) After 15 minutes curing, you will have the initial bonding strength and after 24 hours, you can get the full bonding strength.
E-Asia was set up in 1996 and located at Jingjiang, a beautiful city in China. Our company is bearing manufacturer&bearing distributor. Since it was first established, E-AISA was dedicated in research, development and manufacture of bearings. Now, E-AISA has become main and one of the first grade suppliers of all kinds of bearings.
Our products include: Deep Groove Ball Bearings, Self-aligning Ball Bearings, Spherical Bearings, Tapered Roller Bearings, Cylindrical Roller Bearings, Needle Roller Bearings, Self-aligning Roller Bearings, Angular Contact Ball Bearings, Thrust Ball Bearings and Trust Roller Bearings and Special Bearings. We also provide OEM beaings.
E-Asia is a backbone enterprise for bearing production in China. With an area of 60, 000 square meters, more than 260 sets devices and machines, and around 200 employees, our company annually turns out more than 6 million sets bearings.
Our Bearings are exported to the USA, Canada, UK, Germany, Poland, Italy, Russia, the Middle East, Africa and other countries and regions of the world. E-Asia Bearing Co. Ltd. Is committed to the introduction of high-quality bearing products. Our company have more than 200 employees. Our brands include SKF bearings, NSK bearings, TIMKEN bearings, KOYO bearings, NTN bearings, IKO bearings and so forth.
Our belief is "Specialization is quality; Quality is the future. Any product with 0.01% defect is 100% reject" is our quality policy.
