Categories
| Supplier: | Green Leaf Chemical Limited |
|---|---|
| Price: | Negotiable |
| Min Order: | 1 |
| Quantity:: | |
|
|
| Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
|---|---|
| Use: | Appliance Paint |
| Appearance: | Liquid |
| Level: | Primer |
| Substrate: | Steel |
| Method: | Spray, Brush or Roller |
| GREEN LEAFE CHEMICAL LIMITED | ||||||
|
GREEN LEAF Handbook of industrial protective coatings |
One component chlorosulfonated polyethylene coating CP167 |
|||||
| Application | Applies to all chemical atmospheric corrosion protection of various steel facilities and decoration, and its film properties is equivalent to two-component chlorosulfonated polyethylene base paint (in acid, alkali, oil, etc.), can be made of thick membrane-type anti-corrosion coatings for pipes. | |||||
| Products Introduction | Made from chlorosulfonated polyethylene, pigments, filler, accelerator, stabilizer, modified resin and solvent composition. | |||||
| Product data | Solid volume | 45% | ||||
| Dry film thickness | Primer: 20 ~ 26 microns; finish: 20 microns | |||||
| Theoretical spreading rate |
Primer: 20 m2/kg Finish: 20 m2/kg |
|||||
| Practical Coverage | Allow appropriate loss | |||||
| Works described in detail | Mixing ratio | Single canned | ||||
| Construction method | ||||||
| Airless spray | Not recommended | |||||
| Brush or roller | Recommended | |||||
| Conventional spray | Recommended | |||||
| Thinner | BW101 | |||||
| Paint equipment cleaning agent | BW101 | |||||
| Use of | No limit | |||||
| Shelf life | 6months | |||||
| Drying time | ||||||
| Substrate temperature | Surface dry(min) | Completely dry(h) | Repeat painting interval | |||
| The shortest | The longest | |||||
| 25degrees centigrade | 30 | 24 | 2h | 7days | ||
| Storage and management | Fully cured | 7days | ||||
| Storage | Store in a cool dry place | |||||
| Packing |
20 kgin the 20 liter container |
|||||
| Flash point | 37degrees centigrade | |||||
| Proportion | About 1.7 kg / liter | |||||
| Technical requirements and surface treatment | Steel surface: sand blasting to Swedish standards Sa2.5 level or power tools or hand-derust Swedish standard St3 level. | |||||
| Restriction | Recommended coating channels: three bottom three sides. | |||||
| Safety measures | See“Summary of Paint" | |||||
Manufacturers Directory | Hot Products | China Products | Companies List| Resources Directory | News | Sitemap | Disclaimer | About Us | Contact Us | Cautop|
Copyright 2003-2024 China Manufacturer Directory.