Phone Repeater/ GSM/Dcs/WCDMA Triple Wide Band Repeater

Product Specifications

Prod Model:	GCPR-GDW30
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Installation Type:	Indoor, Small Size
Technic Advantage:	Alc&Agc Mgc
Certificate:	CE RoHS ISO
Work Environment:	Office Building,House,Coffe Shop
Affect:	Slove Poor Signal Problems
Type:	Wireless Repeater

Product Description

Features:

1. The consumer repeater is an ideal solution for providing a cost effective improvement in cellular in-building coverage of a home, office, restaurant or building, in the quickest time possible.

2. Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance

3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.

4. Auto shut off function available for both uplink and downlink to avoid deep self-oscilation from jamming the towers, saving your trouble from operators.

5. Multiple phones and other handheld devices throughout a building can benefit from a wireless repeater.

6. Supports up to (200) users / calls simultaneously.

7. Extended phone battery life. (Your phone does not need to put out as much power due to improved reception. )


We can make such as bellow frequenies:

For indoor single band intelligent repeater: GSM900, GSM1800, GSM1900M, CDMA850, 3G2100 etc

For dualband and tri-band intelligent repeater: GSM900+GSM1800 dualband, GSM900+3G2100M dualband, 900+1800+2100 triband etc.

Outdoor series: Fullband repeater, band selective repeater, frequency selective repeater, frequency shifting repeater etc.

Electrical specification		Uplink	Downlink
Frequency Range	GSM900 & EGSM	880 ~ 915 MHz	925 ~ 960 MHz
	DCS	1710 ~ 1785 MHz	1805 ~ 1880 MHz
	WCDMA	1920 ~ 1980 MHz	2110 ~ 2170 MHz
Max .Gain	F30-TB	≥75dB	≥78dB
Max .Output Power	F30-TB	≥20dBm	≥30dBm
Band width (-3dB)		Wide Band
MGC ( Step Attenuation )		≥ 31dB / 1dB step
Automatic Level Control		≥ 15dB, auto shut off after 15dB
Gain Flatness	GSM & CDMA	Typ≤ 6dB(P-P); DCS,PCS≤ 8dB(P-P)
	WCDMA	≤ 2dB/ 3.84MHz,Full Band≤ 5dB(P-P)
Noise Figure		≤ 8dB
VSWR		≤ 2.0
Group Delay		≤ 1.5μs
Frequency stability		≤ 0.01ppm
Spurious Emission &                                                            Output inter-modulation		GSM Meet  ETSI TS 151 026 V 6.1.0
		WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )
		CDMA Meet  IS95 & CDMA2000
WCDMA System	Spurious Emission Mask	Meet 3GPP TS 25.143 ( V 6.2.0 )
	Modulation Accuracy	≤ 12.5%
	Peak Code Domain Error	≤ -35dB@Spreading Factor 256
LED  Alarm		Standard
Power LED		Power Indicator
ALC LED 1 (Low frequency Band)		Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB,
		LED off after 5 seconds red color
ALC LED 2 (Middle frequency Band)		Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB,
		LED off after 5 seconds red color
ALC LED 3 (High frequency Band)		Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB,
		LED off after 5 seconds red color
Mechanical  Specifications		Standard
I /O Port		N-Female
Impedance		50 ohm
Operating Temperature		-25ºC~+55ºC
Environment Conditions		IP40
Dimensions		250x350x52mm
Weight		≤6.5Kg
Power Supply		Input AC90~264V,output DC10V / 10A