Categories
Prod Model: | GLC-EPSP401 |
---|---|
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Use: | Appliance Paint |
Method: | Spray |
Appearance: | Liquid |
Level: | Finish Coat |
Substrate: | Steel |
GREEN LEAF CHEMICAL LIMITED | ||||||
GREEN LEAF Handbook of industrial protective coatings |
Solvent-free epoxy tank coating EPSP401 |
|||||
Application |
*Does not contain volatile organic solvents, 100% solids, cured at room temperature (5 ~ 45 degree centigrade). * Coating with excellent chemical resistance, oil, water, seawater, temperature, no effect on the oil, and easy to clean, non-toxic, good adhesion and mechanical properties, easy construction. * Especially for poorly ventilated environment, construction, such as storage tanks, water tanks and other vessels |
|||||
Products Introduction | Two-component,mix pre-construction , a liquid bisphenol A Group were epoxy resin, pigments and fillers, additives and other components of paints, Part B curing agent. | |||||
Product data | Solid volume | 100% | ||||
Dry film thickness | Recommended 200 to 300 microns | |||||
Theoretical spreading rate | 4.0~4.55m 2 /kg | |||||
Practical Coverage | Allow appropriate loss | |||||
Color | After mixing green (A: yellow, B: blue) | |||||
Works described in detail | Mixing ratio | Part A (paint): B (curing agent) = 100:32(weight ratio) | ||||
Airless spray | Recommended by: nozzle width 0.53 ~ 0.66mm,Vent Hydraulic 19 ~ 24.6MPa (190 ~ 246kg / cm2) | |||||
Conventional spray | Not recommended | |||||
Thinner | No | |||||
Paint equipment cleaning agent | BW103 | |||||
Use of |
5 degree centigrade~1.5h 23 degree centigrade~45min 35 degree centigrade~30min |
|||||
Drying time | ||||||
Substrate temperature | Surface dry (h) | Completely dry (h) | Repeat brushing interval | |||
Re-coated with their own products | ||||||
The shortest | The longest | |||||
5 degree centigrade 23 degree centigrade 35 degree centigrade |
7 3 2 |
15 8 5 |
24h 16h 8h |
14days 14days 7days |
||
Storage and management | Storage | Store in a cool and dry environment. | ||||
Flashpoint | > 23 degree centigrade (the main agent, curing agent or other mixtures ) | |||||
Packing |
A: 21kg in the 20 liter container B: 3kg in 4liter containers |
|||||
Proportion | 1.6~1.7kg / liter | |||||
Technical requirements and surface treatment | According toSSPC-SPl,use cleaning solvent to remove grease, remove welding slag, weld and polished edges, and blasting with sand or wet cleaning to the Swedish standard Sa2.5 S1S055900, sand roughness 75-100 microns, such as when blasting with saline or equivalent salt, in the coating of this product should wash the entire surface with clear water, this product can accept the re-oxidation of the yellow rust, and re-applied to completely dry surface. | |||||
Restrictions | In the water, the curing time will be extended, the coating originally designed as "one time" the coating, such as the need to make paint, painting directly on the wet paint on the bottom, some brush with the repair primer for a serious depression If you need to re-coated multi-layer, or curing conditions are cold and wet, please contact our company, the substrate temperature can not exceed 50 degree centigrade. | |||||
Safety measures | See“Summary of Paint" |