Thread Sealant for Coarse Thread Sealing (SA4577)
SA4569 is one component high strength anaerobic thread sealant, no mixing is needed. It is designed for the locking and sealing of metal pipes and fitting. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.
Features
1. One component, requires no mixing
2. High strength, prevents loosening and leakage from shock and vibration.
3. Anaerobic sealant, not used in pure oxygen and/or oxygen rich systems
4. Cured in the absence of air between two surfaces.
Professions involved
It is designed for the sealing and locking of metal pipes and fittings.
Operation
For Assembly
1. For better results, clean all surfaces(external and internal) with a cleaning solvent 2755 and allow
To dry.
2. Apply a 360 bead of product to the leading threads of the male fitting, leaving the first thread free.
Force the material into the threads to thoroughly fills the voids. For bigger threads and voids,
Adjust product amount accordingly and apply a 360 bead of product on the female threads also.
3. Properly tightened fitting will seal instantly to moderate pressures. For maximum pressure
Resistance and solvent resistance allow the product to cure a minimum of 24 hours.
For Disassembly
1. Remove with standard hand tools.
2. Where hand tools do not work because of excessive engagement length or large diameters (over
1"), apply ocalized heat to approximately 250 ° C. Disassemble while hot.
For Clean up
Cured product can be removed with a combination of soaking in a solvent and mechanical abrasion
Such as a wire brush.
Package
50ml/tube
Storage
1. Kept in cool and dry place(8-28º C), the shelf life is 24 months.
2. Non-dangerous. Looking out the leakage in the process of transportation.
3. Confirming the condition of the products that out of deadline before using.
Uncured
|
Testing Term |
Testing Standard |
Typical Value |
Range |
|
Appearance(uncured) |
|
Yellow Paste |
|
|
Chemical Type |
|
Methacrylate Ester |
|
|
Viscosity(mPa.s) |
GB/T2794-1995
Brookfield RVF
6#rotor 2.5rpm |
85,000 |
50,000-120,000 |
|
6#rotor 20rpm |
23,000 |
15,000-32,000 |
|
Density(g/cm 3 ) |
GB/T 13354-1992 |
1.10 |
|
|
Flash Point(ºC) |
SH/T0733-2004 |
|
>93 |
|
Maximum thread diameter |
|
M80 |
|
|
Fixed Time(h) |
|
|
<1 |
Fully
Cured |
Fully cured at RTV(h) |
|
24 |
|
|
Maximum sealing pressure(MPa) |
|
65 |
|
|
Strength for remove |
|
Medium |
|
|
Sealing pressure of work time |
|
Instant |
|
|
Operation Temperature |
|
|
-50-150 |
Chemical/Solvent Resistance
Aged under conditions indicated and tested at 22 ºC.
|
|
|
% of Initial Strength |
|
Environment |
ºC |
100 hr |
500 hr |
1000 hr |
|
Motor Oil |
125 |
100 |
100 |
100 |
|
Unleaded Gasoline |
22 |
100 |
100 |
100 |
|
Ethanol |
22 |
100 |
100 |
95 |
|
Acetone |
22 |
90 |
80 |
65 |
|
Water/Glycol |
87 |
100 |
90 |
90 |
Founded in DEC. 2003, SEPUNA has been engaged in researching, manufacturing and marketing automobile sealant and adhesive for 9 years.
Since the foundation, SEPUNA Chemical has been focusing on adhesive's researching and application. Then in 2005, We acquired PUNADE technology which is from Switzerland.
Within 9 years, SEPUNA mainly develops Silicone, Polyurethane and Epoxy resin adhesives. And in the future, we will enlarge our line to Unsaturated, Natural and Acrylic Resin adhesive.
After 9 years' improvement, by the keep researching and innovation, SEPUNA is already a mature adhesive supplier with the core competitiveness.
