Toyota A341e Automatic Transmission Training System

DLQC-DPBS003

Toyota A341E Automatic Transmission Training System

1. Introduction

The training platform select Toyota A341 electrical controlled automatic transmission assembly, with complete accessories, production quality management according to requirement of ISO9001: 2008 standards, different gear of automatic transmission can be completed. Suitable for the automatic transmission construction and maintenance of schools and vocational technical training and senior automotive training institutions, practice teaching, can meet training project of electronically controlled automatic transmission structures, teaching theory, fault diagnosis, fault set and trouble shooting and assessment.

2. Basic Configuration

Automatic transmission assembly Toyota A341, automatic transmission control unit, meter assembly, transmission lever, gear shift assembly, training panel, Diagnostic communication link, brake master cylinder, brake wheel cylinders, brake discs, brake booster vacuum pump, brake pedal, three-phase asynchronous motor, inverter, leakage protection, DC12V power supply, ignition switch, ignition key, power switch, mobile workbench and casters relay and fuse box, manual and training guide book and other components.

3. Features

1. Demonstrates electrical control automatic transmission is working properly or not, experiments of the inverter to achieve gear lift of transmission at different input speeds;

2. LED to show the distribution of different gears dynamically;

3. With a combined instruments, display speed, vehicle speed, the main oil gallery change when gear lifting in different circumstances;

4. Judge the gear shift situation by the output speed by digital meter.

5. The training sets can control the output shaft by hydraulic brake system control;

6. Can test the auto transmission stall and delay.

7. The training sets are equipped with automatic transmission system colored schematics and detection terminal, various signal parameters of the sensors, solenoid valves can be detected by special instruments. For example, voltage, resistance, frequency, etc;

8. The training units equipped with diagnostic communication link can be connected to a dedicated or general- auto decoders, automatic transmission system for read fault codes, clear fault codes read the data stream and other diagnostic functions;

9. Fault setting and assessment system ( see fault setting and assessment function description);

10. Training sets rotational positions are equipped with safety shields to avoid security risk;
4. Training Content

1. Structures and working process training of automatic transmission;

2. Neutral gear start, forward gears, reverse run training under different gears of automatic transmission;

3. Gear determine training of automatic transmission;

4. Solenoid valve working condition training of automatic transmission;

5. The main oil pressure, speed, speed changes comparative training with different gear of automatic transmission;

6. Schematic analysis training of automatic transmission circuit;

7. Control unit fault code reader, clear DTCs, read data stream training of automatic transmission;

8. Fault diagnosis and confirmation training of automatic transmission;

9. Fault setting and trouble-shooting training of automatic transmission;

10. Practical training and theoretical examinations of automatic transmission.

5. Technique Features

1. The workbench with high-grade automotive paint, paint treated at high temperatures, against moisture and rust, with beautiful and durable appearance;

2. GB standard high quality material for support frame (40 * 60 * 3mm welding square pipe);

3. Dimensions: 1200 *1000 * 1800mm