WPC-10 Series Pressure Controller

Product Specifications

Prod Model:	WPC-10
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe

Product Description

Environment-friendly:silent design.
Safe: IP65,water-proof case,water-shortage protection.
Intelligent: Preventing the pump automatically restart frequently.
Reliable: Electronic Design, long-life for using, more than 200,000 times operation,anti-vibration.
Widely application:Pipeline Pump,Booster Pump,Self-priming pump,Immersible Pump,Circulating Pump ect.,widely using for solar heat pump,air-source heat pump,WILO home booster pump,hot water circulating pump and other relevant pumps.


WPC-10 Electronic Pressure Controller for Pump which is a digital display pressure switch .WPC-10 integrated the function of measure,display and control. It is easy for operation,anti-vibration,high accuracy,long-life for using. The extra function like water shortage protection,error correction and password protected. It can control and protect your pump very well.

The Wiring
Please see the back of the WPC-10 pressure control,the left is Chinese word"",you can supply 220Vac from here,the right is Chinese word"",please connect it with the pump 220Vac supply terminal.

Notice
1. Please set the correct upper and lower pressure value and water shortage protection value before using our device.
2. Please cut off the power when you install our device.
3. Please don't immerse the device into the water.
4. Please read the manual carefully before using.
5. Please don't repair the device privately,or it regard as you give up the warranty.
6. One-year warranty, free service for repair but buyer bear the freight cost of return.

Setting
1. Set ON/OFF Pressure value:
Default: Start @ 1.5KG/CM2 (lower); Stop @ 2.9KG/CM2(upper)
(1) Press "on/off" key to start the setting (1 SECOND)
CHANGE THE UPPER VALUE
(2) Press key ,it display:"H2.9",then you pressure the again(1 SEC.),the value will be added by 0.1KG,you can also long press the key to speed it and set your upper value.After setting.please wait 2 sec.,the device will display"888" ,it will be save your setting value automatically.
Remark: The Upper Limited :"Lower value ~9.9", LOOP SETTING
CHANGE THE LOWER VALUE
(3) Press key ,it display:"L1.5",then you pressure the again(1 SEC.),the value will be reduced by 0.1KG,you can also long press the key to speed it and set your lower value.After setting.please wait 2 sec.,the device display"888",it will be save your setting value automatically.
Remark: The Lower Limited :"water shortage protection value ~the upper limit value", LOOP SETTING
(4) After Setting,you can start use the WPC-10 pressure controller.

2. How to SET the value of water shortage protection value?
(1) Press "on/off" key to start the setting (1 SECOND)
(2) Press the "Protect",the default value"F0.2",setting method which is the same with upper and lower value setting.
Remark:Protection Value Rang"0.1~the lower value",but you can set it according to your actual usage.Reference"0.1~0.5"
(3) Cancel the water shortage protection,you set the value "F0.0"

3. Reset and Error Correction
(1) Press "on/off" key to start the setting (1 SECOND)
(2) Press ""+"ON/OFF" 5 seconds,you will see "C-L",the device reset successfully.
Remark:You must set it without any pressure.If the device does n't display 0.0 when you use it in the first time,please reset it before using.

4.Time-delay for Stop the Pump
In order to prevent the pump start and stop frequently,we can set a time-delay for stop the pump. Please press "protect"+"",it display"n03"(default time delay 3 seconds),then you can press up or down key to modify the value,then press the "ON/OFF"key to save the setting.