The TDS-100H ultrasonic flow meter is designed to measure the fluid velocity of liquid within a Closed conduit. The transducers are a non-contacting, clamp-on type, which will provide benefits Of non-fouling operation and easy installation.
The TDS-100H transit time flow meter utilizes two transducers that function as both ultrasonic Transmitters and receivers. The transducers are clamped on the outside of a closed pipe at a Specific distance from each other. The transducers can be mounted in V-method where the sound Transverses the pipe twice, or W-method where the sound transverses the pipe four times, or in Z-method where the transducers are mounted on opposite sides of the pipe and the sound crosses The pipe once. This selection of the mounting method depends on pipe and liquid characteristics. The flow meter operates by alternately transmitting and receiving a frequency modulated burst of Sound energy between the two transducers and measuring the transit time that it takes for sound to Travel between the two transducers. The difference in the transit time measured is directly and Exactly related to the velocity of the liquid in the pipe
FEATURES:
1. Repeatability: Better than 0.2%
2. Accuracy: 1% of reading at rates>0.2 mps
3. Response Time: 0-999 seconds, user-configurable
4. Velocity: 32 m/s
5. Totalizer 7-digit totals for net, positive and negative flow
6. Liquid Types Virtually all liquids
7. Security Setup values Modification Lockout. Access code needs Unlocking
8. Display 4x8 Chinese characters or 4x16 English letters, display Instant flow, velocity, total flow, signal status
9. Signal output Non-isolation RS232(FUJI extention protocol), one Channel isolation OCT output
10. Transducers Clamp on type transducers
11. Transducer Cord Length Standard 2x10 meters, optional 2x 500 meters
12. Power Supply 3 AAA Ni-H built-in batteries. When fully recharged it will Last over 12 hours of operation. 100V-240VAC for the charger
13. Data Logger Built-in data logger can store over 2000 lines of data
14. Housing Material ABS
15. Case Size 100x66x20mm
16. Handset Weight 514G (1.2 lbs) with batteries
Our Company, ShenZhen U-tech Machine Tools Co., Ltd., has been established in order to introduce "Top Class Quality Machine Tools selected form Various Chinese Products " to oversea markets.
Especially, for Measuring Tools, we are collaborated with Japanese Calibration Company to assure you quality of our products. For the following items, we shall inspect the goods in accordance with JCSS
1. Hardness Tester,
2. Profile Projector
3. Milling machine
We are also in a position to supply the following products:
1. Micrometer
2. Microscope
3. Magnifier
4. Any other measuring tools
For the above, we shall inspect quality very carefully by our own inspectors before delvery, not to give you any quality problems.
Our Company's Policy is very simple, "Select and Introduce Best Quality Chinese Products close to Japanese Standaard".
If you are interested in, pleae visit our WEB and check our production ranges.
