Product Specifications
Product Description
HTS-301Catalyst (below as HTS-301 type M. T. Shift Catalyst) is used for conversion reaction that converts CO and steam into H2 and CO2. It is suitable for synthetic ammonia & hydrogen making installations in varieties of scale, which uses coal, coke or hydrocarbons as raw materials. Especially suitable for energy saved CO conversion process with low steam/gas ration, can inhibit the F-T reaction effectively.
Characteristics
HTS-301 type M. T. Shift Catalyst is manufactured with the international advanced co-precipitation & macerate process, using ferrous(Fe2+) nitrate as raw material. Major components are Fe2O3 & Cr2O3, also contain a small quantity of promoter. Its major characteristics are:
1) Low sulphur content and No desupphurisation period.
Normal S content is 200ppm. No desulphurisation period is required during initial start up.
2) High strength in reducing phase Strength doesn't lower subject to reduction. No brittle failure or crush during long operation period.
3) Good activity at low temperature
Appears apparent activity at 250Deg. C and satisfactory conversion rate can be obtained when temperature at inlet of the converter is at 280-320Deg. C. The converter is easily to resume normally after a short shut down.
4) No by-product formation at low steam to carbon ratios and Low steam consumption.
Standard properties:
Appearance: Black-grey smooth cylinder
Diameter (mm): 9.0-9.5 or 5.5-6.5
Length (mm): 5.0-7.0 or 3.0-5.0
Bulk density, kg/L: 1.25-1.45
Activity after heat resistant (CO shift rate), %: 50.0 min.
Radical strength before reduction, N/cm: 200. 0 min.
Pellets' percentage of strength below 147 N/cm, %: 10.0 max.
Friction loss %: 10.0 max.
Burned los, %: 10.0 max.
Fe
2O
3 content in catalyst body, %: 78.0-82.0
Cr
2O
3 content in catalyst body, %: 9.0-10.0
CuO content in catalyst body, %: 1.5-2.5
Sulphur content in catalyst body (as S), %: 0.025 max.
Sun Chemical Technology Co., Ltd. (SUNCHEM) is a leading company of specialty chemicals and materials in China. We produce catalysts, adsorbents, tower packing, supports, offering customers not only the industry's finest product lines, but also the expert value-added services and unparalleled customer support they need to maximize operating efficiency and reduce overall cost.
Currently we are focuing on the following markets and products:
Syngas catalysts and adsorbents:
Feed Purification: Hydrodesulphurization catalysts, ZnO for Sulfur removal, MnO series for sulfur removal, Iron oxide series for sulfur removal, Chlorine removal adsorbent, Arsenic removal adsorbent, etc.
Pre-reforming catalyst, Primary reforming catalyst, secondary reforming catalyst, CO High(MID) Temperature shift catalyst, CO low temperature shift catalyst, Methanation catalyst, ammonia synthesis catalyst, methanol synthesis catalyst, Sulphuric acid catalyst, Claus Sulfur recovery catalyst, HF removal adsorbent, etc.
Chemical Process catalysts:
Methylamine production catalyst, Methylchloride production catalyst, Aniline production catalyst, Ethylamine production catalyst, catalyst, Methylaniline production catalyst, Hydrogenation catalyst for Hydrogen peroxide production, etc.
Tower packing and Supports:
We provide a variety of shapes and sizes and materials of construction to bring to your company the specific tower packing for your needs. The shapes of the tower packing are in the form of rings, saddles, and spheres. We can provide materials that are ceramic, porous, plastic, or steel to meet the specifications of any application that you might have. Our tower packing has been used in every type of refining process by every major oil company and is well proven.
