Radar Level Meter (A+E-62LB)
| Price: |
US $ 700/Piece |
| Trade Terms: |
FOB,CFR,CIF |
| Min Order: |
1/Piece |
| Pay Type: |
L/C,T/T,Western Union |
radar level meter A+E-62LB
A+E 62L Radar Level Meter are 26G HF radar level meter, the maximum
measuring distance of which reaches 70 meters.The antenna can be further
optimized and the new-type microprocessor can process signal analysis of
higher speed. So the meter can be used for complicated measuring conditions
of reaction still and solid material stock bin.
Characteristics
1. Transmitting frequency as high as 26GHz
2. Non-contacting radar, no abrasion and contamination
3. Small-sized antenna for easy installation
4. Shorter wave length, better reflection achieved on inclined solid surface
5. Smaller dead zone, better results ensured even in cannikin measurement
6. Small beam angle and concentrated energy to avoid interferences.
7. Hardly influenced by corrosion and foam.
8. Hardly influenced by changes of steam vapor, temperature and pressure.
9. Hardly impacted by heavy dust.
10. High SNR to ensure performance even under fluctuation.
11. Choice for solid media and media with low dielectric constant.
Operating Principle
Radar level meter antenna transmits narrow microwave pulse, which is
top-down transmitted through antenna. The microwave is reflected after
contacting the surface of measured medium and the signal is received by
antenna system, then the part transmitted to electronic circuit is converted
into material level signal automatically. (Because the microwave transmission
is extremely rapid, so the round-trip time between the objective and the
receiver is almost instantaneous.)
Note: Make sure that the highest material level does not enter into
measurement dead zone.
|
Type |
A+E 62LA |
A+E 62LB |
A+E 62LC |
A+E 62LD |
A+E 62LE |
A+E 62LF |
|
Application |
Various highly-corrosive liquids |
Liquid with temperature resistance, pressure-tolerance and slight corrosion |
Storage tank of sanitation liquid, and highly-corrosive containers |
Solid particles, dusts |
Solid materials, process container or strong dust |
Solid materials, process container or strong dust |
|
Measuring range |
20 m |
30 m |
20 m |
30 m |
70 m |
70 m |
|
Connection |
Threads and Flanges |
Threads and Flanges |
Flange |
Threads and Flanges |
Universal Flanges |
Threads and Universa lFlanges |
|
Temp |
-40~120 degree |
-40~150 degree |
-40~150 degree |
-40~250 degree |
-40~250 degree |
-40~250 degree |
|
Pressure |
-0.1~0.3MPa |
-0.1~4.0MPa |
Ambient pressure |
-0.1~4.0MPa |
-0.1MPa |
-0.1MPa |
|
Accuracy |
±5mm |
±3mm |
±3mm |
±10mm |
±15mm |
±15mm |
|
Frequency |
26GHz |
26GHz |
26GHz |
26GHz |
26GHz |
26GHz |
|
Anti-explosion |
ExiaIICT6 |
ExiaIICT6 |
ExiaIICT6 |
ExiaIICT6 |
ExiaIICT6 |
ExiaIICT6 |
|
Protection |
IP67 |
IP67 |
IP67 |
IP67 |
IP67 |
IP67 |
|
Signal output |
4...20mA/HART (two-line/four-line)
RS485/Modbus |
4...20mA/HART(two-line/four-line)
RS485/Modbus |
4...20mA/HART (two-line/four-line)
RS485/Modbus |
4...20mA/HART (two-line/four-line)
RS485/Modbus |
4...20mA/HART (two-line/four-line)
RS485/Modbus |
4...20mA/HART (two-line/four-line)
RS485/Modbus |
| Prod Model: |
A+E-62LB |
| Markets: |
South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia |
| Frequency Range: |
26GHz |
| Dead Zone: |
0.4m |
| Power Supply: |
24VDC or 220VAC |
| Signal Output: |
4-20mA with Hart or RS485 with Modbus |
| Conduit / Cable Thread: |
M20*1.5 or 1/2 NPT |
| Antenna: |
Rod or Bellmouth |
| Installation: |
Flange or Thread |
| Protection: |
Exia II CT6 |
| Structure: |
All in One, All in One~ |
| Kind: |
RF Admittance |
Shanghai AEAD Technology Co., Ltd is a cooperation of Chinese and German technique which mainly performs in R&D, production and sales.
AEAD Technology was first founded in 2009 in Jiangsu, and established Shanghai Branch in May 18th, 2014. The new Shanghai factory would complete in DEC 2014, located in the Free Trade Zone. Before the business started in 2009, the General Manager Mr. R. H. Liu and Technical Director Mr. S. P. Zong had dedicated in instrumentation for more than 20 years. After 5 years development and achieving good reputation in domestic market, we become a leading manufacture in East China. Now we believe we are ready to overseas users.
The company adopts advanced production line from Germany, and the main products include A+E series products for exporting and A+D products for domestic sales in pressure, temperature, flow, level, calibration and valve which can cater for the needs from domestic and foreign markets. Products are organized and sold under fully dedicated divisions, each staffed with an experienced and highly trained team of dedicated technical sales, applications engineering and customer service support personnel. Products are applied to water treatment, petrochemical, chemicals, machinery, pharmacy, food, mine, metallurgy, etc.
AEAD Technology adheres to the development strategy of Internationalization, Technicalization, Industrialization, which can realize the high-end extension of the products from domestic market to international market. The value chain turns from providing single product to system solution, and the operation expands from linear-oriented to a comprehensive modern enterprise operation including merger and capital operation.
The company has already passed the ISO9001 Quality Management System Certification, ISO14001 Environmental System Certification, and Occupation Health Safety Management System Certification (OHSAS18000).
