1. Ball Mill Brief Introduction:
Ball Millgrinds material by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. The rotation is usually between 4 to 20 revolutions per minute, depending upon the diameter of the mill. The larger the diameter, the slower the rotation. If the peripheral speed of the mill is too great, it begins to act like a centrifuge and the balls do not fall back, but stay on the perimeter of the mill. The point where the mill becomes a centrifuge is called the "Critical Speed", and ball mills usually operate at 65% to 75% of the critical speed.
2. Ball Mill Features:
1) Ball mill is an efficient tool for grinding many materials into fine powder.
2) The ball mill is used to grind many kinds of mine and other materials, or to select the mine
3) Ball mill is widely used in building material, and chemical industry.
4) There are two ways of grinding: The dry way and the wet way.
5) Ball mill can be divided into tabular type and flowing type according to different expelling mine
6) To use the ball mill, the material to be ground is loaded into the neoprene barrel that contains grinding media.
7) As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours.
8) The longer the ball mill runs, the finer the powder will be.
9) Ultimate particle size depends entirely on how hard the material you're grinding is, and the time how long the ball mill runs.
10) Our ball mills have been used to grind glass, powder food products, create custom varnishes, make ceramic glaze, and powder various chemicals.
3. The eight reflect of ball mill energy saving:
1). Ball mill low starting current starting time starter flexible. Normal operating current is reduced by 20% -30% to achieve the purpose of saving;
2). Significantly lower than the ordinary type ball mill original motor's power to reduce the installed capacity to enhance the work efficiency to reduce reactive loss;
3). Full use of the the surplus motor capacity and the improvement of the the liner structure can enhance the yield of 5% -7%;
4). The ball mill changed sliding the long service life of the bearing is rolling bearing not only carrying capacity than the sliding bearing life can be increased by 5 or more;
5). To reduce the ball mill main bearing de maintenance amount to improve the sanitary conditions of oil pollution;
6). Ball mill Ganyou Run slide series lose lubrication oil station facilities and motor power decreases fuel economy in the 80% -90%;
7). Ball mill main bearing normal life span of 8-13 years;
8). Reduce downtime due to production cuts by the ball mill due to excessive downtime due to main bearing bush-burning plain bearings warming problem.
Model |
Speed of bucket
(r/min) |
Weight
of ball |
Size of
feed opening(mm) |
size of outputting
feed (mm) |
Production
(t/h) |
Power
(kw) |
Weight
(T) |
900×1800 |
38 |
1.5 |
≤20 |
0.075-0.89 |
0.65-2 |
18.5 |
3.6 |
900×3000 |
38 |
2.7 |
≤20 |
0.075-0.89 |
1.1-3.5 |
22 |
4.6 |
1200×2400 |
32 |
3.8 |
≤25 |
0.075-0.6 |
1.5-4.8 |
45 |
12.5 |
1200×3000 |
32 |
5 |
≤25 |
0.075-0.4 |
1.6-5 |
45 |
12.8 |
1200×4500 |
32 |
7 |
≤25 |
0.075-0.4 |
1.6-5.8 |
55 |
13.8 |
1500×3000 |
27 |
8 |
≤25 |
0.075-0.4 |
2-5 |
90 |
17 |
1500×4500 |
27 |
14 |
≤25 |
0.075-0.4 |
3-6 |
110 |
21 |
1500×5700 |
27 |
15 |
≤25 |
0.075-0.4 |
3.5-6 |
132 |
24.7 |
1830×3000 |
24 |
11 |
≤25 |
0.075-0.4 |
4-10 |
180 |
28 |
1830×6400 |
24 |
23 |
≤25 |
0.075-0.4 |
6.5-15 |
210 |
34 |
1830×7000 |
24 |
25 |
≤25 |
0.075-0.4 |
7.5-17 |
245 |
36 |
2200×5500 |
21 |
30 |
≤25 |
0.075-0.4 |
10-22 |
370 |
48.5 |
2200×6500 |
21 |
30 |
≤25 |
0.075-0.4 |
14-26 |
280 |
52.8 |
2200×7500 |
21 |
33 |
≤25 |
0.075-0.4 |
16-29 |
475 |
56 |
Henan Ruiguang Mechanical Science & Technology Co., Ltd. is a professional manufacturer engaged in the research and development, production, sale and service of machinery. We are located in zhengzhou City, Henan Province and have convenient transportation access.
Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company has introduced a series of advanced equipment.
In addition, we have attained ISO9001 and CE certification. Selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as Russia, Mongolia, India, North Korea and other countries and regions.
Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.
Just contact us, wish we can be your best help.